Eurocopter AS 355 (Twin Ecureuil) Series
Eurocopter AS 355 (Twin Ecureuil) Series Helicopters
Eurocopter AS 355 (Twin Ecureuil) Series Helicopters
| AD/AS 355/18 Amdt 1 | Main Rotor Sleeve Beams | 8/2009 |
|---|
| Applicability: | All model AS 355 helicopters with main rotor head roving sleeve, upper and lower beams part numbers 350A31.1831.04, .05, .06 and .07. |
|---|---|
| Requirement: | Remove main rotor blades and visually check that sleeve bushes are not separated. If any bush separation is found, remove and replace the sleeve beams concerned. Requirement document is French AD 86-35-28 (B), paragraph B; or USA AD86-19-15, paragraph C.Note: Aerospatiale Telex Service Bulletin No. 01.12 refers (no longer distributed.) |
| Compliance: | Before further flight in the event of a sudden or repeated occurrence of a severe tracking defect.Compliance with the original issue of this Directive constitutes compliance with this Amendment. |
| This Amendment becomes effective on 30 July 2009. | |
| Background: | The manufacturer reports cracking in the blade attachment area of the main rotor sleeve beams of a Dauphin SA 365C helicopter. The original issue of this Airworthiness Directive became effective in May 1986. |
| This Amendment is issued to add Part Nos to Applicability; reduce reliance on Service Bulletin No. 01.12 which is no longer distributed; and to identify French and USA Airworthiness Directives. |
View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority
18 June 2009