Turbomeca Turbine Engines - Arrius Serie
Turbomeca Turbine Engines - Arrius Series
Turbomeca Turbine Engines - Arrius Series
| AD/ARRIUS/7 Amdt 1 | High Pressure Turbine | 7/2005 TX |
|---|
| Applicability: | Turbomeca ARRIUS 2F engines which are fitted to Eurocopter EC120B helicopters. |
|---|---|
| Requirement: | 1. Do not operate engines fitted with number 2 modules as listed in Alert Fax TURBOMECA 057/05/DSO/TM.2. Engines may be returned to service following inspection/rework at a repair centre, or after module 2 replacement on site or in a workshop, or after inspection of the standard of the ferrule by applying deep servicing instructions on site.Note: DGAC AD UF-2005-073R1 EASA approval No 2005-3868 dated 29 April 2005 refers. |
| Compliance: | From the effective date of this Directive. |
| This Amendment becomes effective on 5 May 2005. | |
| Background: | Following an accident involving an EC1 208, the initial investigation of the Arrius 2F engine showed that one HP blade was totally released from the HP disk. This blade was contained inside the containment ring.The preliminary examination of the engine parts showed that the standard of one ferrule initiated a disturbance in the secondary air system used to cool the HP turbine.This amendment includes additional information for the return to service of affected engines.The original issue of this Directive became effective 30 April 2005. |
View image in the official source
James Coyne
Delegate of the Civil Aviation Safety Authority
3 May 2005