Pacific Aerospace 750XL Series Aeroplane
Pacific Aerospace 750XL Series Aeroplanes
Pacific Aerospace 750XL Series Aeroplanes
| AD/750XL/4 | Fuselage Frame at Station 384.62 | 7/2005 |
|---|
| Applicability: | Model 750XL aircraft, serial numbers 101 through 108. |
|---|---|
| Requirement: | 1. Inspect in accordance with Pacific Aerospace Corporation Mandatory Service Bulletin (MSB) PACSB/XL/010 to ensure that the correct size rivets have been used to secure the horizontal tail surface load transfer angles to the rearmost fuselage frame at Station 384.62.2. If undersized rivets are installed, replace the rivets in accordance with Section 2.B. of MSB PACSB/XL/010.Note: NZ CAA AD DCA/750XL/4 refers. |
| Compliance: | 1. Within 100 hours time in service after 7 July 2005, unless already accomplished.2. Within 100 hours time in service after inspection. |
| This Airworthiness Directive becomes effective on 7 July 2005. | |
| Background: | This Directive requires an inspection to detect the possible installation of undersized rivets to ensure the aircraft’s structure conforms to the type design and expected levels of strength and durability. |
View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority
25 May 2005