Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.
Obtaining a Copy of this Accounting Stan Obtaining a Copy of this Accounting Standard
Obtaining a Copy of this Accounting Standard
This Standard is available on the AASB website: www.aasb.com.au.
Alternatively, printed copies of this Standard are available for purchase by contacting:
| The Customer Service OfficerAustralian Accounting Standards BoardLevel 4530 Collins StreetMelbourne Victoria 3000AUSTRALIA | Postal address:PO Box 204 Collins St WestMelbourne Victoria 8007AUSTRALIA |
|---|
Phone: (03) 9617 7637
Fax: (03) 9617 7608
E-mail: publications@aasb.com.au
Website: www.aasb.com.au
Other enquiries:
Phone: (03) 9617 7600
Fax: (03) 9617 7608
E-mail: standard@aasb.com.au
COPYRIGHT
© 2005 Commonwealth of Australia
This work is copyright. Reproduction in unaltered form (retaining this notice) is permitted for personal and non-commercial use subject to the inclusion of an acknowledgment of the source. Apart from any use as permitted under the Copyright Act 1968, no part may be reproduced by any process without prior written permission from the Australian Accounting Standards Board. Requests and enquiries concerning reproduction and rights for commercial purposes should be addressed to The Administration Director, Australian Accounting Standards Board, PO Box 204, Collins Street West, Melbourne, Victoria 8007.
ISSN 1036-4803
CONTENTS CONTENTS
CONTENTS
Preface
Comparison With International Pronouncements
Accounting Standard
AASB 1048 Interpretation and Application of Standards
Paragraphs
Objective 1
Application 2 – 7
Scope 8 – 9
UIG Interpretations corresponding to IASB Interpretations 10
Other UIG Interpretations 11
Australian Accounting Standard AASB 1048 Interpretation and Application of Standards is set out in paragraphs 1 – 11. All the paragraphs have equal authority. In the absence of explicit guidance, AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors provides a basis for selecting and applying accounting policies.
Preface Preface
Preface
Reasons for Issuing AASB 1048
The Australian Accounting Standards Board (AASB) is implementing the directive of the Financial Reporting Council (FRC) to adopt the Standards of the International Accounting Standards Board (IASB) for application to reporting periods beginning on or after 1 January 2005. In considering the adoption of the Standards of the IASB, the AASB reached the conclusion that it was desirable to issue an Accounting Standard clarifying the status of the pronouncements of the Urgent Issues Group, the UIG Interpretations (previously known as UIG Abstracts), that are approved by the AASB.
All UIG Interpretations have the same authoritative status and those that are equivalent to the IASB Interpretations must be applied to achieve compliance with the International Financial Reporting Standards (IFRSs) of the IASB.
The IASB defines IFRSs as comprising:
(a) International Financial Reporting Standards;
(b) International Accounting Standards; and
(c) Interpretations originated by the International Financial Reporting Interpretations Committee (IFRIC) or the former Standing Interpretations Committee (SIC).
The Australian equivalents to IFRSs are:
(a) Accounting Standards issued by the AASB that are equivalent to Standards issued by the IASB, being AASBs 1 – 99 corresponding to the IFRS series and AASBs 101 – 199 corresponding to the IAS series; and
(b) UIG Interpretations issued by the AASB corresponding to the Interpretations adopted by the IASB, as listed in AASB 1048 Interpretation and Application of Standards.
Before identifying the main features of this Standard, the adoption of the IASB Standards is described and the need for a ‘service Standard’ like this is explained.
Adoption of IASB Standards
In implementing the FRC’s directive, the AASB is replacing relevant existing AASB Standards with Australian Standards equivalent to those of the IASB. The AASB has decided it will continue to issue sector-neutral Standards, that is, Standards applicable to both for-profit and not-for-profit entities, including public sector entities. Except for Standards that are specific to the not-for-profit or public sectors or that are of a purely domestic nature, the AASB is using the IASB Standards as the “foundation” Standards to which it adds material detailing the scope and applicability of a Standard in the Australian environment. Additions are made, where necessary, to broaden the content to cover sectors not addressed by an IASB Standard and domestic, regulatory or other issues.
This Standard complements the set of Australian equivalents to each IASB Standard (IFRS and IAS) and Interpretation of the IASB. This set includes UIG Interpretations that correspond to the IASB Interpretations originated by the IFRIC or the SIC. When considering the most effective approach to implementing the FRC directive, the AASB decided that Australian-source documents were needed to provide equivalents to the IASB Interpretations, and that these should be UIG Interpretations. Correlation between the UIG Interpretations and the IASB Interpretations is provided in Table 1 of this Standard. This Standard will be re-issued when necessary to bring the correlation up to date.
Need for a Service Standard
In the Australian context, UIG Interpretations do not have the same legal status as Standards (delegated legislation) and are treated as ‘external documents’ by the Acts Interpretation Act 1901 (and also by the Legislative Instruments Act 2003). Although references in one Standard to a second Standard are ambulatory (automatically moving forward to refer to the most recently-issued version of the second Standard), references in a Standard to external documents are stationary (being fixed in time to refer to the contents of the external document when the Standard was issued). A reference to an UIG Interpretation in an AASB Standard issued earlier (for example, in July 2004) than the reporting date at the end of the first effective reporting period can only refer to the Interpretation that existed then (in July 2004). It cannot refer to any revised version of the UIG Interpretation that may exist at the nominated reporting date (for example, 30 June 2006). However, an AASB Standard can be issued in July 2004, referring to a second AASB Standard (existing in July 2004) and, when the first Standard is applied at 30 June 2006, the reference will be to the then-current version of the second Standard (even if it has been re-issued after July 2004).
After analysing the issues, the AASB decided the service Standard approach constitutes the most effective way to ensure that the compliance required in the Australian equivalent of IFRS 1, AASB 1 First-time Adoption of Australian Equivalents to International Financial Reporting Standards, has the same meaning as intended in IFRS 1.
The service Standard approach involves issuing an AASB Standard listing the UIG Interpretations corresponding to each IASB Interpretation, and referring to that Standard in every other AASB Standard where necessary to refer to an UIG Interpretation. This enables references to UIG Interpretations in all other AASB Standards to be updated by re-issuing the service Standard.
This approach preserves the status of UIG Interpretations as ‘external documents’ referred to in a Standard, with the ‘contents’ fixed in time to that existing when the Standard takes effect. It does not treat the UIG Interpretations as delegated legislation or confer ambulatory status on the reference. In each AASB Standard where there is a need to refer to an Australian equivalent of an IASB Interpretation, the reference will be to this Standard, phrased as “UIG Interpretation (number) (title) identified in AASB 1048 as corresponding to IFRIC (or SIC) (number)”. This reference, being to another AASB Standard, is ambulatory and will refer to the Standard, AASB 1048, that is in force from time to time. AASB 1048 itself will contain the direct references to the external documents and it will be re-issued to keep all references to UIG Interpretations in the other Standards up to date.
Implementation of this approach to clarifying the status of UIG Interpretations ensures there is no difference between the status in the hierarchy accorded to Interpretations in IAS 8 Accounting Policies, Changes in Accounting Estimates and Errors compared to AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors.
A further advantage of this approach, compared to alternative approaches, is that it is able to be combined with implementing the perceived need for an AASB Standard clarifying the status of all UIG Interpretations, irrespective of whether they correspond to an IASB Interpretation.
Main Features of this Standard
This Standard (issued in June 2005) supersedes the previous version of AASB 1048, issued in March 2005.
Application Date
This Standard is applicable in general to annual reporting periods ending on or after 31 December 2005, with exceptions for particular Interpretations (see paragraph 3). To be consistent with the position for AASB Standards equivalent to IFRSs, early adoption of this Standard is not permitted for annual reporting periods beginning before 1 January 2005. However, early adoption is otherwise permitted as specified in paragraph 4.
First-time Application and Comparatives
When an entity first applies this Standard in the context of adopting all Australian equivalents to IFRSs, AASB 1 First-time Adoption of Australian Equivalents to International Financial Reporting Standards, the Australian equivalent of IFRS 1, generally requires prior period information, presented as comparative information, to be restated as if the requirements of the Australian equivalents to IFRSs (including those UIG Interpretations equivalent to the IASB Interpretations) had always applied. This differs from the requirements in previous Australian Standards, where changes in accounting policies did not require the restatement of the income statement and balance sheet of the preceding period.
Main Requirements
This Standard identifies the UIG Interpretations and classifies them into two groups: those that correspond to each IASB Interpretation and those that do not.
In respect of the first group (Table 1), it is necessary for those UIG Interpretations, where relevant, to be applied in order for an entity to be able to make an explicit and unreserved statement of compliance with IFRSs. The IASB defines IFRSs to include the IFRIC and SIC Interpretations.
In the second group (Table 2), this Standard lists the other UIG Interpretations, that do not correspond to the IASB Interpretations, to assist financial report preparers and users to identify the other authoritative pronouncements necessary for compliance in the Australian context.
The Standard will be re-issued when necessary to keep the Tables up to date.
Changes from AASB 1048 (March 2005)
The differences between AASB 1048 (issued in March 2005) and this version issued in June 2005 are the addition of two UIG Interpretations to Table 1 in paragraph 10 of the Standard and the addition of two UIG Interpretations to Table 2 in paragraph 11 of the Standard, as set out in the following tables.
<table cellspacing="0" cellpadding="0" style="width:324.35pt; border-collapse:collapse"><thead><tr><td colspan="6" style="width:313.55pt; padding-right:5.4pt; padding-left:5.4pt; vertical-align:top"><h4 id="navPoint_12" style="margin-bottom:3pt"><span>Table 1</span><span> </span><span>–</span><span> </span><span>Additions</span></h4></td></tr><tr><td style="vertical-align:top"></td><td colspan="2" style="width:87.9pt; border-top:1.5pt double #000000; border-bottom:1.5pt double #000000; padding:2.1pt 1.4pt 0.65pt; vertical-align:top"><p style="page-break-after:avoid"><span style="font-weight:bold">UIG Interpretation</span><br><span style="font-size:9pt; font-style:italic">Issue Date</span></p></td><td style="width:12.8pt; border-top:1.5pt double #000000; border-right:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.1pt 1.02pt 0.65pt 1.4pt; vertical-align:top"><p style="text-align:justify"><span style="font-weight:bold"></span></p></td><td style="width:165.9pt; border-top:1.5pt double #000000; border-right:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.1pt 1.02pt 0.65pt; vertical-align:top"><p style="text-align:justify"><span style="font-weight:bold">Title</span></p></td><td style="width:39.7pt; border-top:1.5pt double #000000; border-left:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.1pt 1.4pt 0.65pt 1.02pt; vertical-align:top"><p style="text-align:center"><span style="font-weight:bold">IFRIC or SIC</span></p></td></tr></thead><tbody><tr><td style="vertical-align:top"></td><td style="width:76.6pt; border-top:1.5pt double #000000; border-bottom:0.75pt solid #000000; padding:2.1pt 1.4pt 1.02pt; vertical-align:top"><p style="text-align:justify"><span>UIG Interpretation</span></p><p style="text-align:justify"><span style="font-size:9pt; font-style:italic">June 2005</span></p></td><td colspan="2" style="width:24.1pt; border-top:1.5pt double #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding:2.1pt 1.02pt 1.02pt 1.4pt; vertical-align:top"><p style="text-align:justify"><span>4</span></p></td><td style="width:165.9pt; border-top:1.5pt double #000000; border-right:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding:2.1pt 1.02pt 1.02pt; vertical-align:top"><p><span>Determining whether an Arrangement contains a Lease</span></p></td><td style="width:39.7pt; border-top:1.5pt double #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding:2.1pt 1.4pt 1.02pt 1.02pt; vertical-align:top"><p style="text-align:center"><span>IFRIC 4</span></p></td></tr><tr><td style="vertical-align:top"></td><td style="width:76.6pt; border-top:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.48pt 1.4pt 0.65pt; vertical-align:top"><p style="text-align:justify"><span>UIG Interpretation</span></p><p style="text-align:justify"><span style="font-size:9pt; font-style:italic">June 2005</span></p></td><td colspan="2" style="width:24.1pt; border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.48pt 1.02pt 0.65pt 1.4pt; vertical-align:top"><p style="text-align:justify"><span>5</span></p></td><td style="width:165.9pt; border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.48pt 1.02pt 0.65pt; vertical-align:top"><p><span>Rights to Interests arising from Decommissioning, Restoration and Environmental Rehabilitation Funds</span></p></td><td style="width:39.7pt; border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:1.5pt double #000000; padding:2.48pt 1.4pt 0.65pt 1.02pt; vertical-align:top"><p style="text-align:center"><span>IFRIC 5</span></p></td></tr></tbody><tbody><tr style="height:0pt"><td style="width:6.85pt"></td><td style="width:79.4pt"></td><td style="width:11.3pt"></td><td style="width:15.6pt"></td><td style="width:168.7pt"></td><td style="width:42.5pt"></td></tr></tbody></table>
<table cellspacing="0" cellpadding="0" style="width:324.35pt; border-collapse:collapse"><thead><tr><td colspan="5" style="width:313.55pt; padding-right:5.4pt; padding-left:5.4pt; vertical-align:top"><h4 id="navPoint_13" style="margin-bottom:3pt"><span>Table 2</span><span> </span><span>–</span><span> </span><span>Additions</span></
This is an opening excerpt, not the complete document.