sec.24Declaration of State-controlled roads

### sec.24 Declaration of State-controlled roads The Minister may, by gazette notice, declare a road or route, or part of a road or route, to be a State-controlled road. See sections 84CB and 105JAB for the revocation of a declaration made under this subsection by the making of a declaration under section 84A (1) or 105H (3) . A declaration must be consistent with criteria about the declaration of State-controlled roads in the transport infrastructure strategies. A declaration must enable the location of the road to be identified. The location may be identified by specifying— the starting and ending points of the road; and the alignment of the road; and the width of the road by reference to the constructed centre line of the road pavement or surface. Unless otherwise specified in a declaration, the width of a State-controlled road through a State reserve, State forest, timber reserve, vacant State land or pastoral holding is 30m each side of the centre line of the trafficked route. s 24 amd 2014 No. 43 s 23 (sec.24-ssec.1) The Minister may, by gazette notice, declare a road or route, or part of a road or route, to be a State-controlled road. See sections 84CB and 105JAB for the revocation of a declaration made under this subsection by the making of a declaration under section 84A (1) or 105H (3) . (sec.24-ssec.2) A declaration must be consistent with criteria about the declaration of State-controlled roads in the transport infrastructure strategies. (sec.24-ssec.3) A declaration must enable the location of the road to be identified. (sec.24-ssec.4) The location may be identified by specifying— the starting and ending points of the road; and the alignment of the road; and the width of the road by reference to the constructed centre line of the road pavement or surface. (sec.24-ssec.5) Unless otherwise specified in a declaration, the width of a State-controlled road through a State reserve, State forest, timber reserve, vacant State land or pastoral holding is 30m each side of the centre line of the trafficked route. - (a) the starting and ending points of the road; and - (b) the alignment of the road; and - (c) the width of the road by reference to the constructed centre line of the road pavement or surface.