QLDIn ForceRegulation
South Bank Corporation Regulation 2014
sec.3Format of plans
Start here
Get a plain-English read of sec.3
Turn the raw legal text into a practical explanation grounded in South Bank Corporation Regulation 2014.
### sec.3 Format of plans
A plan (the subject plan ) must be—
in the approved form; and
printed on paper that is—
A3; and
of a density of at least 130gsm; and
numbered as required by a plan direction relevant to the subject plan.
An alteration on a plan must be made by—
striking through the printing or writing being altered so the original printing or writing is still legible; and
having each of the following persons initial the alteration—
the surveyor who prepared the plan;
if the alteration affects a boundary of land—the appropriate authority and the registered owner of the land.
In this section—
plan direction means a direction of the registrar of titles under the Land Title Act 1994 , section 10 (1) (b) about the required format for a plan.
s 3 amd 2021 Act No. 12 s 148 sch 3
(sec.3-ssec.1) A plan (the subject plan ) must be— in the approved form; and printed on paper that is— A3; and of a density of at least 130gsm; and numbered as required by a plan direction relevant to the subject plan.
(sec.3-ssec.2) An alteration on a plan must be made by— striking through the printing or writing being altered so the original printing or writing is still legible; and having each of the following persons initial the alteration— the surveyor who prepared the plan; if the alteration affects a boundary of land—the appropriate authority and the registered owner of the land.
(sec.3-ssec.3) In this section— plan direction means a direction of the registrar of titles under the Land Title Act 1994 , section 10 (1) (b) about the required format for a plan.
- (a) in the approved form; and
- (b) printed on paper that is— (i) A3; and (ii) of a density of at least 130gsm; and
- (i) A3; and
- (ii) of a density of at least 130gsm; and
- (c) numbered as required by a plan direction relevant to the subject plan.
- (i) A3; and
- (ii) of a density of at least 130gsm; and
- (a) striking through the printing or writing being altered so the original printing or writing is still legible; and
- (b) having each of the following persons initial the alteration— (i) the surveyor who prepared the plan; (ii) if the alteration affects a boundary of land—the appropriate authority and the registered owner of the land.
- (i) the surveyor who prepared the plan;
- (ii) if the alteration affects a boundary of land—the appropriate authority and the registered owner of the land.
- (i) the surveyor who prepared the plan;
- (ii) if the alteration affects a boundary of land—the appropriate authority and the registered owner of the land.