sch.66-sec.23Application for final approval

### sch.66-sec.23 Application for final approval This section applies to a registered provider who has received conditional approval for assistance under the scheme for the purchase and installation of an energy upgrade measure in or for an eligible dwelling. The registered provider must apply for final approval for assistance for an energy upgrade measure for the eligible dwelling before— the day (the initial due day ) that is 6 months after the day the provider received written notice of the conditional approval under section 12 (3) (the conditional approval day ); or if the authority considers it is not reasonably practicable for the provider to have applied for final approval before the initial due day—a later day, within 8 months after the conditional approval day, decided by the authority and notified in writing to the provider. The application must— be made in the approved form; and relate to all energy upgrade measures, including at least 1 primary measure, for which final approval is sought for the eligible dwelling; and if the application relates to the purchase and installation of an energy-efficient hot water system servicing 2 or more eligible dwellings—relate to each of the dwellings. The application must be accompanied by— if the application relates to installation of an energy upgrade measure mentioned in any of sections 20 to 22 —evidence, to the satisfaction of the authority, that the measure has been installed in compliance with the section; and without limiting paragraph (a) , for the installation of an energy upgrade measure that is eligible ceiling insulation— a copy of the certificate mentioned in section 21 (2) (b) ; and if the installation involves high risk construction work—a copy of the safe work method statement for the work; and a copy of each tax invoice for the purchase and installation of each energy upgrade measure; and for the installation of an energy upgrade measure that is eligible ceiling insulation—a copy of each tax invoice for the costs associated with— arranging for the inspection and testing of the electrical installation mentioned in section 21 (2) (a) ; and obtaining the certificate for the inspection and testing mentioned in section 21 (2) (b) ; and if relevant, obtaining the safe work method statement mentioned in section 21 (4) ; and evidence, to the satisfaction of the authority, that the applicant has paid each tax invoice; and any other documents stated in the form. Subsection (4) (d) does not prevent the costs mentioned in subsection (4) (d) being included in a tax invoice mentioned in subsection (4) (c) . (sch.66-sec.23-ssec.1) This section applies to a registered provider who has received conditional approval for assistance under the scheme for the purchase and installation of an energy upgrade measure in or for an eligible dwelling. (sch.66-sec.23-ssec.2) The registered provider must apply for final approval for assistance for an energy upgrade measure for the eligible dwelling before— the day (the initial due day ) that is 6 months after the day the provider received written notice of the conditional approval under section 12 (3) (the conditional approval day ); or if the authority considers it is not reasonably practicable for the provider to have applied for final approval before the initial due day—a later day, within 8 months after the conditional approval day, decided by the authority and notified in writing to the provider. (sch.66-sec.23-ssec.3) The application must— be made in the approved form; and relate to all energy upgrade measures, including at least 1 primary measure, for which final approval is sought for the eligible dwelling; and if the application relates to the purchase and installation of an energy-efficient hot water system servicing 2 or more eligible dwellings—relate to each of the dwellings. (sch.66-sec.23-ssec.4) The application must be accompanied by— if the application relates to installation of an energy upgrade measure mentioned in any of sections 20 to 22 —evidence, to the satisfaction of the authority, that the measure has been installed in compliance with the section; and without limiting paragraph (a) , for the installation of an energy upgrade measure that is eligible ceiling insulation— a copy of the certificate mentioned in section 21 (2) (b) ; and if the installation involves high risk construction work—a copy of the safe work method statement for the work; and a copy of each tax invoice for the purchase and installation of each energy upgrade measure; and for the installation of an energy upgrade measure that is eligible ceiling insulation—a copy of each tax invoice for the costs associated with— arranging for the inspection and testing of the electrical installation mentioned in section 21 (2) (a) ; and obtaining the certificate for the inspection and testing mentioned in section 21 (2) (b) ; and if relevant, obtaining the safe work method statement mentioned in section 21 (4) ; and evidence, to the satisfaction of the authority, that the applicant has paid each tax invoice; and any other documents stated in the form. (sch.66-sec.23-ssec.5) Subsection (4) (d) does not prevent the costs mentioned in subsection (4) (d) being included in a tax invoice mentioned in subsection (4) (c) . - (a) the day (the initial due day ) that is 6 months after the day the provider received written notice of the conditional approval under section 12 (3) (the conditional approval day ); or - (b) if the authority considers it is not reasonably practicable for the provider to have applied for final approval before the initial due day—a later day, within 8 months after the conditional approval day, decided by the authority and notified in writing to the provider. - (a) be made in the approved form; and - (b) relate to all energy upgrade measures, including at least 1 primary measure, for which final approval is sought for the eligible dwelling; and - (c) if the application relates to the purchase and installation of an energy-efficient hot water system servicing 2 or more eligible dwellings—relate to each of the dwellings. - (a) if the application relates to installation of an energy upgrade measure mentioned in any of sections 20 to 22 —evidence, to the satisfaction of the authority, that the measure has been installed in compliance with the section; and - (b) without limiting paragraph (a) , for the installation of an energy upgrade measure that is eligible ceiling insulation— (i) a copy of the certificate mentioned in section 21 (2) (b) ; and (ii) if the installation involves high risk construction work—a copy of the safe work method statement for the work; and - (i) a copy of the certificate mentioned in section 21 (2) (b) ; and - (ii) if the installation involves high risk construction work—a copy of the safe work method statement for the work; and - (c) a copy of each tax invoice for the purchase and installation of each energy upgrade measure; and - (d) for the installation of an energy upgrade measure that is eligible ceiling insulation—a copy of each tax invoice for the costs associated with— (i) arranging for the inspection and testing of the electrical installation mentioned in section 21 (2) (a) ; and (ii) obtaining the certificate for the inspection and testing mentioned in section 21 (2) (b) ; and (iii) if relevant, obtaining the safe work method statement mentioned in section 21 (4) ; and - (i) arranging for the inspection and testing of the electrical installation mentioned in section 21 (2) (a) ; and - (ii) obtaining the certificate for the inspection and testing mentioned in section 21 (2) (b) ; and - (iii) if relevant, obtaining the safe work method statement mentioned in section 21 (4) ; and - (e) evidence, to the satisfaction of the authority, that the applicant has paid each tax invoice; and - (f) any other documents stated in the form. - (i) a copy of the certificate mentioned in section 21 (2) (b) ; and - (ii) if the installation involves high risk construction work—a copy of the safe work method statement for the work; and - (i) arranging for the inspection and testing of the electrical installation mentioned in section 21 (2) (a) ; and - (ii) obtaining the certificate for the inspection and testing mentioned in section 21 (2) (b) ; and - (iii) if relevant, obtaining the safe work method statement mentioned in section 21 (4) ; and