sec.674Requirement to have safety management system

### sec.674 Requirement to have safety management system The operator of an operating plant must— for each stage of the plant, make or adopt a safety management system that complies with— section 675 ; and if the plant is used to explore for, extract, produce or release petroleum within coal seams— section 705C ; and implement and maintain the system. Maximum penalty—1,500 penalty units. The operator of an operating plant must not begin a stage of the plant unless— the operator has made or adopted a safety management system that applies to the stage; and the system complies with section 675 ; and if the plant is used to explore for, extract, produce or release petroleum within coal seams—the system complies with section 705C . Maximum penalty—1,000 penalty units. A safety management system may apply to more than 1 operating plant. However, the system must still comply with section 675 in relation to each operating plant to which the system applies. For coal mining-CSG operating plant, see division 4 (Special provisions for safety management systems for coal mining-CSG operating plant). Also, if chapter 9 , part 4 , division 5 , subdivision 1 applies for an operating plant, the safety management system must include a joint interaction management plan. s 674 amd 2007 No. 46 s 214 ; 2011 No. 2 ss 121 , 122 sch ; 2014 No. 64 s 222 ; 2019 No. 7 s 313 s ch 1 pt 1 (sec.674-ssec.1) The operator of an operating plant must— for each stage of the plant, make or adopt a safety management system that complies with— section 675 ; and if the plant is used to explore for, extract, produce or release petroleum within coal seams— section 705C ; and implement and maintain the system. Maximum penalty—1,500 penalty units. (sec.674-ssec.2) The operator of an operating plant must not begin a stage of the plant unless— the operator has made or adopted a safety management system that applies to the stage; and the system complies with section 675 ; and if the plant is used to explore for, extract, produce or release petroleum within coal seams—the system complies with section 705C . Maximum penalty—1,000 penalty units. (sec.674-ssec.3) A safety management system may apply to more than 1 operating plant. (sec.674-ssec.4) However, the system must still comply with section 675 in relation to each operating plant to which the system applies. For coal mining-CSG operating plant, see division 4 (Special provisions for safety management systems for coal mining-CSG operating plant). (sec.674-ssec.5) Also, if chapter 9 , part 4 , division 5 , subdivision 1 applies for an operating plant, the safety management system must include a joint interaction management plan. - (a) for each stage of the plant, make or adopt a safety management system that complies with— (i) section 675 ; and (ii) if the plant is used to explore for, extract, produce or release petroleum within coal seams— section 705C ; and - (i) section 675 ; and - (ii) if the plant is used to explore for, extract, produce or release petroleum within coal seams— section 705C ; and - (b) implement and maintain the system. - (i) section 675 ; and - (ii) if the plant is used to explore for, extract, produce or release petroleum within coal seams— section 705C ; and - (a) the operator has made or adopted a safety management system that applies to the stage; and - (b) the system complies with section 675 ; and - (c) if the plant is used to explore for, extract, produce or release petroleum within coal seams—the system complies with section 705C .