sec.283Plan of surface land

### sec.283 Plan of surface land The site senior executive for an underground mine must ensure a plan of the mine’s surface land complies with this section. The scale of a hard copy of the plan must be 1:2500. The information about the mine shown on the plan must include— the information mentioned in section 282 (4) (a) , (b) , (g) and (i) ; and the contours of the reduced levels of the surface of the land plotted at intervals of not more than 5m. The locations mentioned in section 282 (4) (g) may be shown by a numbering system if— the information mentioned in the subsection can not be conveniently recorded on the plan; and details of at least the depth of the boreholes, drifts and shafts are kept in a separate record at the mine. The site senior executive must ensure at least 1 copy of the plan kept at the mine is drawn on a transparency so the plan can be overlaid on the plan of underground mine workings. (sec.283-ssec.1) The site senior executive for an underground mine must ensure a plan of the mine’s surface land complies with this section. (sec.283-ssec.2) The scale of a hard copy of the plan must be 1:2500. (sec.283-ssec.3) The information about the mine shown on the plan must include— the information mentioned in section 282 (4) (a) , (b) , (g) and (i) ; and the contours of the reduced levels of the surface of the land plotted at intervals of not more than 5m. (sec.283-ssec.4) The locations mentioned in section 282 (4) (g) may be shown by a numbering system if— the information mentioned in the subsection can not be conveniently recorded on the plan; and details of at least the depth of the boreholes, drifts and shafts are kept in a separate record at the mine. (sec.283-ssec.5) The site senior executive must ensure at least 1 copy of the plan kept at the mine is drawn on a transparency so the plan can be overlaid on the plan of underground mine workings. - (a) the information mentioned in section 282 (4) (a) , (b) , (g) and (i) ; and - (b) the contours of the reduced levels of the surface of the land plotted at intervals of not more than 5m. - (a) the information mentioned in the subsection can not be conveniently recorded on the plan; and - (b) details of at least the depth of the boreholes, drifts and shafts are kept in a separate record at the mine.