{"id":"F2007L02707","name":"Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007","slug":"vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":169429,"registerId":"commonwealth-F2007L02707-current","compilationNumber":null,"startDate":"2026-04-04","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"Annex 1 - Appendix","sectionType":"subdivision","heading":"Annex 1 - Appendix","content":"#### Annex 1 - Appendix\n\nLIST OF VEHICLE DATA FOR THE PURPOSE OF REGULATION No. 90 APPROVALS \\*/\n\n1. Description of the vehicle type: ...........................................\n\n1.1. Trade name or mark of the vehicle, if available: ..............................\n\n1.2. Vehicle category: ......................................................\n\n1.3. Vehicle type according to Regulation No. 78 approval: .........................\n\n1.4. Models or trade names of vehicles constituting the vehicle type, if\n\navailable: .............................................................\n\n1.5. Manufacturer's name and address: .........................................\n\n2. Make and type of brake linings: ...........................................\n\n3. Minimum mass of vehicle: ...............................................\n\n3.1. Distribution of mass of each axle (maximum value): ...........................\n\n4. Gross vehicle mass of vehicle: ............................................\n\n4.1. Distribution of mass of each axle (maximum value): ...........................\n\n5. Vmax ................ km/h\n\n6. Tyre and wheel dimensions: ..............................................\n\n7. Configuration of the independent braking systems: ............................\n\n8. Specifications of brake valves (if applicable): ................................\n\n8.1. Adjustment specifications of the load sensing valve: ...........................\n\n8.2. Setting of pressure valve: ................................................\n\n9. Specification of brake: ..................................................\n\n9.1. Disc brake type (e.g. number of pistons with diameter(s), ventilated or solid disc): ...\n\n9.2. Drum brake type (e.g. simplex, with piston size and drum dimensions):............\n\n10. Master cylinder type and size (if applicable):.................................","sortOrder":0}],"analysis":{"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"},"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This appears to be a standard technical appendix for vehicle brake approval. As a data collection form within a vehicle standard, it serves its original narrow purpose of collecting specific technical information for regulatory compliance. No scope expansion is evident."},"complexity_factors":["Simple numbered list format with 10 main items and sub-items","No defined terms section or interpretation provisions","No cross-references to other legislation sections","Straightforward data collection form with no conditional logic","Minimal legal language - primarily technical specifications","Single purpose: gathering vehicle brake system data for regulatory approval"],"plain_english_summary":"This is a technical form that motorcycle and moped manufacturers must fill out when seeking Australian approval for their brake systems. It collects detailed specifications about the vehicle and its braking components to ensure they meet safety standards. The form asks for information like vehicle make and model, weight distribution, maximum speed, tyre sizes, and detailed brake specifications (whether disc or drum brakes, piston sizes, etc.). This data is used to verify that brake systems comply with international safety regulations before vehicles can be sold in Australia."},"flash_summary":{"complexity_score":3,"scope_assessment":{"changed":false,"description":"This appendix does not alter which vehicles are regulated. It only clarifies and standardises the data required for Regulation No. 90 approval applications under ADR 33/00, shifting administrative burden to applicants without expanding or narrowing regulatory coverage."},"complexity_factors":["Structured checklist format with many technical fields (mass, axle distribution, Vmax, tyre/wheel dimensions, brake types and component specs).","Requires precise technical measurements and specifications that fall to manufacturers or test laboratories to produce.","Cross-references to other regulatory approvals (mentions Regulation No. 78 and Regulation No. 90), creating dependence on external approvals or definitions.","No detailed units, tolerances or submission format specified in the appendix itself, leaving implementation details to applicants or authorities.","Multiple component-level entries (disc/drum/master cylinder/valves) increases potential documentation and verification workload."],"plain_english_summary":"This appendix prescribes the exact vehicle data manufacturers or approval applicants must supply to obtain a Regulation No. 90 approval under ADR 33/00 (brake systems for motorcycles and mopeds). It lists identity and manufacturer details, masses and axle loads, Vmax, tyre/wheel sizes, braking system configuration and component specifications.\n\nManufacturers supply this information to approval authorities and bear the costs of measurement, testing and recordkeeping. The appendix standardises what must be submitted, concentrating compliance effort on technical measurement and documentation."}},"importantCases":[],"_links":{"self":"/api/acts/vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007","history":"/api/acts/vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007/history","analysis":"/api/acts/vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007/analysis","conflicts":"/api/acts/vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007/conflicts","importantCases":"/api/acts/vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007/important-cases","documents":"/api/acts/vehicle-standard-australian-design-rule-33-00-brake-systems-for-motorcycles-and-mopeds-2007/documents"}}