{"id":"F2010L02284","name":"Tariff Concession Revocation Order 20/2010 - Tariff Concession Order 0932294","slug":"tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":125007,"registerId":"commonwealth-F2010L02284-current","compilationNumber":null,"startDate":"2026-04-03","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Revocation Order 20/2010 - Tariff Concession Order 0932294","content":"| TARIFF CONCESSION REVOCATION ORDERUnder Section 269SD(2) of the Customs Act 1901, I Wendy Knowles a delegate of the Chief Executive Officer(a) revoke Tariff Concession Order Number 0910964 made on 19.06.09, in respect of the goods described in TABLE A below. This Revocation has effect from 01.04.09; and(b) make in its place the Tariff Concession Orders described in TABLE B. The goods specified in Column 1 of TABLE B are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of TABLE B applies. The Order shall have effect from the date notified in paragraph (a) above as the date of effect for the Revocation. |\n| -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTABLE A\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item Number Last date of effect |\n| ----------------------------------------------------------------------- | -------------------------------------------------- |\n\n| 8479.90.00 | PARTS, HORIZONTAL STIRRED GRINDING MILL, being ANY of thefollowing:(a) drive end flanges;(b) drive end flange liner outers;(c) drive end flange wear sleeves;(d) drive end flange liner inners;(e) displacement bodies;(f) discharge ring wear sleeves;(g) discharge rings;(h) displacement body end plates;(i) discharge body end plate liners;(j) rotors;(k) rotor bushes;(l) shaft spacers;(m) shaft end caps;(n) shaft end cap face plates;(o) rotor rings;(p) rotor fingers;(q) non-drive end flanges;(r) non-drive end flange liners;(s) non-drive end flange liner wear sleeves;(t) scuttle sleeves;(u) non-abrasive grinding discs;(v) hubs;(w) gland inner sleeves;(x) gland wear sleeves;(y) gland housing wear caps;(z) gland housing extensions;(aa) gland housings;(ab) gland cushions;(ac) gland neck rings;(ad) gland lantern rings;(ae) gland followers;(af) gland cushion protection ring retainers;(ag) shell linersOp. 01.04.09 - TC 0910964 | 50N/A |\n| ---------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----- |\n\n| This is page 1 of 2 Pages of the instrument...Wendy Knowles........................Dated 02 September 2009 Delegate of the Chief Executive Officer |\n| -------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTABLE B\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item Number Last date of effect |\n| ----------------------------------------------------------------------- | -------------------------------------------------- |\n\n| 8474.90.00 | PARTS, HORIZONTAL STIRRED GRINDING MILL, being ANY of thefollowing:(a) drive end flanges;(b) drive end flange liner outers;(c) drive end flange wear sleeves;(d) drive end flange liner inners;(e) displacement bodies;(f) discharge ring wear sleeves;(g) discharge rings;(h) displacement body end plates;(i) discharge body end plate liners;(j) rotors;(k) rotor bushes;(l) shaft spacers;(m) shaft end caps;(n) shaft end cap face plates;(o) rotor rings;(p) rotor fingers;(q) non-drive end flanges;(r) non-drive end flange liners;(s) non-drive end flange liner wear sleeves;(t) scuttle sleeves;(u) non-abrasive grinding discs;(v) hubs;(w) gland inner sleeves;(x) gland wear sleeves;(y) gland housing wear caps;(z) gland housing extensions;(aa) gland housings;(ab) gland cushions;(ac) gland neck rings;(ad) gland lantern rings;(ae) gland followers;(af) gland cushion protection ring retainers;(ag) shell linersOp. 01.04.09 - TC 0932294 | 50  |\n| ---------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |\n\n| This is page 2 of 2 Pages of the instrument...Wendy Knowles........................Dated 02 September 2009 Delegate of the Chief Executive Officer |\n| -------------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"flash_summary":{"complexity_score":4,"scope_assessment":{"changed":true,"description":"The instrument does not change the physical goods covered (the listed mill parts remain identical) but changes their tariff classification and the Schedule 4 concession application by revoking TCO 0910964 and substituting TCO 0932294 (classification change 8479.90.00 → 8474.90.00). That reclassification changes which duty/concession treatment applies from the stated effective date, so importers' legal tariff liability and entitlement to the listed concession are altered."},"complexity_factors":["Legal basis: revocation and substitution made under s.269SD(2) of the Customs Act 1901 (instrument header).","Tariff reclassification: movement of goods from heading 8479.90.00 to 8474.90.00 — a technical change that can alter rate or concession applicability (Tables A and B).","Retrospective effect: the replacement operates from 01.04.2009 although the instrument is dated 02.09.2009, creating retrospective application and potential adjustment needs for past entries.","Goods description stability: the detailed list of parts is unchanged, so the substantive goods covered remain the same while legal classification changes.","Schedule 4 assignment: the new order specifies the Schedule 4 item (Part III, item 50) affecting concession entitlement and duty treatment.","Administrative discretion and record updates: decision by a CEO delegate (Wendy Knowles) requires Customs systems, importer records and possibly previous refunds or assessments to be rechecked."],"plain_english_summary":"This instrument revokes an earlier tariff concession order and replaces it with a new order that reassigns the same listed parts for a horizontal stirred grinding mill to a different Customs Tariff classification (changing 8479.90.00 to 8474.90.00). It takes effect from 1 April 2009. Importers of these parts and Customs officers are affected because the change alters which Schedule 4 concession item and thus which duty treatment applies, requiring updated classification and compliance records."},"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This is a technical administrative amendment that maintains the same scope of goods (parts for horizontal stirred grinding mills) but reclassifies them under a more appropriate tariff heading. The revocation and replacement mechanism is standard for tariff concession orders when classification errors are corrected or goods are better described under alternative tariff provisions."},"complexity_factors":["Very short document (2 pages)","Only 2 defined elements: the old order number and new order number","No nested conditional logic or exceptions","Single cross-reference to Customs Act 1901 section 269SD(2) and Customs Tariff Act 1995 Schedule 4","Straightforward tabular format listing specific mechanical parts","No subordinate legislation or regulations referenced beyond the two primary Acts"],"plain_english_summary":"This order cancels a prior tariff concession for parts of horizontal stirred grinding mills and reissues it under a different customs classification. It affects importers of those mill parts, customs brokers/forwarders and the Australian Border Force by relocating the items from a general machinery code to one for crushing/grinding/separating equipment. The recategorisation (effective from 1 April 2009) can change duty treatment and better reflects the parts’ use in mining and mineral processing."},"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294","history":"/api/acts/tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294/history","analysis":"/api/acts/tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294/analysis","conflicts":"/api/acts/tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294/conflicts","importantCases":"/api/acts/tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294/important-cases","documents":"/api/acts/tariff-concession-revocation-order-20-2010-tariff-concession-order-0932294/documents"}}