{"id":"F2010L02073","name":"Tariff Concession Order 1010373","slug":"tariff-concession-order-1010373","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":124665,"registerId":"commonwealth-F2010L02073-current","compilationNumber":null,"startDate":"2026-04-03","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 1010373","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Wendy Knowles, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 01.03.10 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n```html\n

7226.92.00

STEEL STRIP, cold rolled, in coil form, having ALL of the
following:
(a) chemical composition by percentage of weight in
accordance with EITHER of the compositions listed in
THE TABLE;
(b) dimensions, being ANY of the following width and
thickness combinations:
(i) 26 mm width (25.91/26.42 mm) x 4 mm thickness
(3.90/4.12 mm);
(ii) 26 mm width (25.91/26.42 mm) x 4.5 mm thickness
(4.49/4.71 mm);
(iii) 39 mm width (38.61/39.12 mm) x 4 mm thickness
(3.56/3.80 mm);
(iv) 39 mm width (38.61/39.12 mm) x 5 mm thickness
(4.83/5.09 mm),
(c) camber tolerance in accordance with British Standard
1449 (BS1449) Part 1, Table 30

THE TABLE

COMPOSITION 1

CARBON (C) NOT less than 0.37 and NOT greater than 0.44;
MANGANESE (Mn) NOT less than 0.70 and NOT greater than 1.00;
SILICON (Si) NOT less than 0.17 and NOT greater than 0.37;
SULPHUR (S) NOT greater than 0.035;
PHOSPHOROUS (P) NOT greater than 0.035;
CHROMIUM (Cr) NOT greater than 0.25;
NICKEL (Ni) NOT less than 0.30;
COPPER (Cu) NOT greater than 0.25

COMPOSITION 2

CARBON (C) NOT less than 0.37 and NOT greater than 0.44;
MANGANESE (Mn) NOT less than 0.50 and NOT greater than 0.80;
SILICON (Si) NOT less than 0.17 and NOT greater than 0.37;
SULPHUR (S) NOT greater than 0.035;
PHOSPHOROUS (P) NOT greater than 0.035;
CHROMIUM (Cr) NOT less than 0.80 and NOT greater than 1.10;
NICKEL (Ni) NOT greater than 0.30;
COPPER (Cu) NOT greater than 0.30

Op. 01.03.10 - TC 1010373

50

This is page 1 of 1 Page of the above Table.

...................Wendy Knowles ....................

Dated 30 April 2010 Delegate of the Chief Executive Officer

\n```","sortOrder":0}],"analysis":{"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"},"flash_summary":{"complexity_score":5,"scope_assessment":{"changed":false,"description":"The Order itself defines a narrow product scope by detailed chemical and dimensional criteria and an effective date (01.03.10). The instrument states it continues in force until revoked under ss. 269SC or 269SD of the Customs Act 1901; there is no text in the Order indicating any change or expansion of that scope after commencement."},"complexity_factors":["Highly technical product specification: multiple chemical composition ranges (C, Mn, Si, S, P, Cr, Ni, Cu) requiring laboratory verification.","Two alternative compositions (Composition 1 and Composition 2) increase testing/qualification permutations.","Precise dimensional tolerances with narrow numerical ranges for width and thickness (multiple size combinations).","Reference to an external standard for camber tolerance (BS1449 Part 1, Table 30) introduces reliance on non‑statutory material.","Tied to a specific tariff classification code (7226.92.00) and a Schedule 4 item (50), so legal effect depends on correct classification.","Administrative timing and lifecycle: effective date (01.03.10) and continuation until revocation under Customs Act ss. 269SC/269SD.","Decision and enforcement are delegated (made under s.269P by a delegate), implying administrative discretion in application and revocation."],"plain_english_summary":"This Tariff Concession Order (TCO 1010373) declares a narrowly‑defined class of cold‑rolled steel strip in coil form — specified by precise chemical composition ranges, exact width/thickness combinations and a camber tolerance referencing BS1449 — to attract the Schedule 4 tariff item from 1 March 2010 until revoked. \n\nIt affects importers and manufacturers by altering tariff treatment only for steel that meets the listed physical and chemical specifications; compliance requires proving the product matches those specifications."},"kimi_summary":{"content_quality":"ok","complexity_score":4,"scope_assessment":{"changed":false,"description":"This is a standard, single-product Tariff Concession Order with appropriately narrow scope. It covers only one specific type of steel product with tightly defined specifications, which is the intended purpose of such orders — to grant duty relief for particular goods where no equivalent Australian product exists."},"complexity_factors":["Highly technical product specifications with precise chemical composition ranges for 8 different elements","Four specific dimensional combinations with tight manufacturing tolerances (e.g., '25.91/26.42 mm')","Reference to external technical standard (British Standard 1449 Part 1, Table 30)","Nested conditional logic: goods must satisfy ALL of (a), (b), and (c), where (a) offers TWO alternative compositions and (b) offers FOUR alternative dimension combinations","Cross-references to multiple Acts: Customs Act 1901 (sections 269P, 269SC, 269SD) and Customs Tariff Act 1995 (Schedule 4, Part III, Item 50)"],"plain_english_summary":"This Tariff Concession Order lets importers bring specific cold‑rolled steel strip into Australia duty‑free (or at reduced duty) provided the product meets tightly defined technical and dimensional specifications and quality standards. \n\nIt mainly affects importers and competing Australian manufacturers (who may object if they make equivalent product). The concession lowers costs for businesses needing specialised steel but can be contested by local industry concerned about competition."}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-1010373","history":"/api/acts/tariff-concession-order-1010373/history","analysis":"/api/acts/tariff-concession-order-1010373/analysis","conflicts":"/api/acts/tariff-concession-order-1010373/conflicts","importantCases":"/api/acts/tariff-concession-order-1010373/important-cases","documents":"/api/acts/tariff-concession-order-1010373/documents"}}