{"id":"F2010L01343","name":"Tariff Concession Order 0943744","slug":"tariff-concession-order-0943744","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":83784,"registerId":"commonwealth-F2010L01343-current","compilationNumber":null,"startDate":"2026-04-02","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 0943744","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, David Mulcair, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 19.11.09 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n| 7210.69.00 | STEEL SHEET, ALUMINIUM SILICON ALLOY COATED, whether or not incoil, having ALL of the following:(a) width 630 mm, 699 mm, 780 mm, 790 mm, 810 mm, 900 mm,914 mm, 930 mm, 990 mm, 1 000 mm, 1 025 mm, 1 030 mm,1 035 mm, 1 100 mm, 1 120 mm, 1 146 mm, 1 160 mm,1 165 mm, 1 170 mm, 1 200 mm, 1 219 mm, 1 220 mm, 1 250 mm;(b) thickness 0.55 mm, 0.60 mm, 0.72 mm, 0.75 mm, 0.80 mm,0.90mm, 0.96 mm, 1.00 mm, 1.15 mm, 1.20 mm, 1.50 mm,1.55 mm, 1.60 mm, 1.90 mm or 2.00 mm;(c) coating consisting of NOT less than 88% aluminium andbalance silicon;(d) coating weight NOT less than 20 gsm and NOT greater than90 gsm;(e) conforming to EITHER of the following:(i) American Society of Testing and MaterialsStandards A 463, having ANY combination of thefollowing:(i) coating symbol T1-25 or T1-40;(ii) quality CS or FS or DDS or EDDS;(ii) Japanese Industrial Standard JIS G 3314, having ANYcombination of the following:(i) coating symbol 40 or 60 or 80;(ii) quality SA1C or SA1D or SA1EFor the purposes of this order tolerances allowable on widthsand thicknesses are:(a) widths + or - 2 mm;(b) thicknesses + or - 0.2 mmOp. 19.11.09 - TC 0943744 | 50  |\n| ---------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |\n\n| This is page 1 of 1 Page of the above Table...David Mulcair........................Dated 05 February 2010 Delegate of the Chief Executive Officer |\n| ------------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"flash_summary":{"complexity_score":6,"scope_assessment":{"changed":false,"description":"The Order itself defines a specific, narrow class of steel sheet eligible for the referenced Schedule 4 item; the instrument contains no text indicating a change from an earlier or original scope."},"complexity_factors":["Highly technical product specification: many discrete permitted widths and thicknesses (specific mm values) increase classification precision and transaction-level complexity.","Material composition and coating criteria: minimum 88% aluminium content, balance silicon, and specified coating weight range (20–90 gsm) require chemical/physical verification.","Tolerances: explicit width ±2 mm and thickness ±0.2 mm tolerances require measurement and quality-control procedures on arrival.","Dual conformity pathways: goods may conform to either ASTM A463 (with specified coating symbols and quality codes) or JIS G 3314 (with specified symbols and quality codes), creating combinatorial compliance checks.","Legal cross-references: invokes s.269P of Customs Act 1901 and refers to Part III of Schedule 4 of the Customs Tariff Act 1995, with revocation governed by ss.269SC/269SD — requires legal interpretation for scope and duration.","Administrative identification: specific Tariff Concession Order number, operative date and delegate signature mean customs officers, importers and suppliers must match paperwork precisely.","Enforcement and proof burden rests with importers/suppliers to demonstrate conformity to listed standards and tolerances at import clearance.","Potential for edge-case disputes: narrow wording (exact numbers, combinations of symbols/qualities) increases likelihood of classification disagreements and requests for administrative rulings."],"plain_english_summary":"This Order declares that a narrowly defined set of aluminium‑silicon alloy coated steel sheets (specified by exact widths, thicknesses, coating composition and weight, tolerances, and conformity to ASTM or JIS standards) are goods to which the listed item in Part III of Schedule 4 of the Customs Tariff Act 1995 applies. It takes effect from 19 November 2009 and remains in force until revoked. It therefore changes tariff treatment and import compliance obligations for importers and suppliers of those specified steel sheets."},"kimi_summary":{"content_quality":"ok","complexity_score":3,"scope_assessment":{"changed":false,"description":"This is a standard administrative instrument creating a specific tariff concession. It remains tightly scoped to the particular steel product described and does not appear to have expanded beyond its original purpose of granting duty relief for this specific category of coated steel sheet."},"complexity_factors":["Highly specific technical specifications with enumerated lists of exact measurements (22 width options, 14 thickness options)","Nested conditional logic: goods must satisfy ALL of criteria (a) through (e), where (e) contains EITHER/OR branches with ANY combination sub-options","Cross-references to external standards (ASTM A 463 and JIS G 3314) without reproducing their content","Tolerance provisions (+/- 2mm for width, +/- 0.2mm for thickness) add a layer of mathematical interpretation","Multiple defined symbols and quality grades referenced from external standards (T1-25, T1-40, CS, FS, DDS, EDDS, SA1C, SA1D, SA1E)","Legislative framework references (Customs Act 1901 s 269P, s 269SC, s 269SD; Customs Tariff Act 1995 Schedule 4 Part III) create statutory context dependencies"],"plain_english_summary":"This Tariff Concession Order lets certain aluminium‑silicon alloy coated steel sheet enter Australia at reduced or zero customs duty, provided it meets strict size, coating and quality specs (ASTM or JIS). It affects importers of this specific product and competing Australian manufacturers (who may object). Effective 19 November 2009, the concession lowers input costs while guarding against misuse by narrow technical limits."},"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-0943744","history":"/api/acts/tariff-concession-order-0943744/history","analysis":"/api/acts/tariff-concession-order-0943744/analysis","conflicts":"/api/acts/tariff-concession-order-0943744/conflicts","importantCases":"/api/acts/tariff-concession-order-0943744/important-cases","documents":"/api/acts/tariff-concession-order-0943744/documents"}}