{"id":"F2010L02833","name":"Tariff Concession Order 0912410","slug":"tariff-concession-order-0912410","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":84790,"registerId":"commonwealth-F2010L02833-current","compilationNumber":null,"startDate":"2026-04-02","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 0912410","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Damien Beaumont, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 15.04.09 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n| 3911.90.00 | RESIN, POLYETHERSULFONE, in pellet form, having ALL of thefollowing:(a) tensile modulus 7 300 MPa;(b) density 1 500 kg/m3;(c) melt volume flow rate at 360 degrees C/10 kg of 29 cm3/10minutes;(d) 20% glass fibre reinforcementTolerances of + 10% and - 10% are allowable for specifications(a) through to (d)Op. 15.04.09 - TC 0912410 | 50  |\n| ---------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |\n\n| This is page 1 of 1 Page of the above Table...Damien Beaumont......................Dated 10 July 2009 Delegate of the Chief Executive Officer |\n| --------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"},"flash_summary":{"complexity_score":2,"scope_assessment":{"changed":false,"description":"No change from the instrument's stated application: the Order applies item 50 of Part III, Schedule 4 to the listed polyethersulfone resin from 15 April 2009 and remains in force until revoked under sections 269SC or 269SD of the Customs Act 1901. It does not amend the broader Customs Tariff Act; it only declares the listed goods as subject to the identified Schedule 4 item."},"complexity_factors":["Narrow, technical product specification requiring numeric proof (tensile modulus, density, melt volume flow, 20% glass fibre; ±10% tolerances) increases verification steps at importation (Table: goods description).","Single tariff classification provided (3911.90.00) simplifies HS coding but still requires matching lab/test evidence to the listed specs.","Relies on statutory declaration and administrative discretion under s269P of the Customs Act 1901 (delegate makes the declaration).","Duration is open‑ended (effective from 15.04.09 until revoked under ss269SC or 269SD), creating ongoing administrative monitoring for revocation or continuation.","Compliance burden falls on importers to demonstrate conformity with the listed numeric specifications at point of entry.","Document is narrow in scope (one product/item), so legal complexity is low but technical and evidentiary requirements are the main practical complexity."],"plain_english_summary":"This Order treats a specified polyethersulfone resin (20% glass‑filled pellets meeting listed numeric physical specifications) as covered by item 50 in Part III of Schedule 4 to the Customs Tariff Act 1995, effective 15 April 2009 until revoked. \n\nThat mechanically lets eligible importers claim the Schedule 4 concession when clearing customs; a delegate of the CEO decides eligibility under s269P of the Customs Act 1901. Affected parties include importers and manufacturers using the resin; compliance requires meeting the numeric specifications set out in the Table."},"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This is a standard, narrow tariff concession order of the type routinely made under the Customs Act 1901. It applies only to the specific goods described and does not expand beyond the original purpose of granting duty relief for particular imported products."},"complexity_factors":["Single, narrow product scope (one specific resin type)","Only 4 technical specifications with simple tolerance ranges","No cross-references to other legislation beyond basic enabling Act citations","Standard administrative form with minimal conditional logic","Single page document with straightforward tabular format"],"plain_english_summary":"This Tariff Concession Order allows a reduced customs duty for a narrowly defined polyethersulfone resin—pellet form with specified stiffness, density, melt flow and exactly 20% glass-fibre content (±10%). It lowers input costs for importers and Australian manufacturers who use this high‑performance engineering plastic, while increasing competitive pressure on domestic resin producers. The tight technical criteria limit the concession to that specific product."}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-0912410","history":"/api/acts/tariff-concession-order-0912410/history","analysis":"/api/acts/tariff-concession-order-0912410/analysis","conflicts":"/api/acts/tariff-concession-order-0912410/conflicts","importantCases":"/api/acts/tariff-concession-order-0912410/important-cases","documents":"/api/acts/tariff-concession-order-0912410/documents"}}