{"id":"F2007L03742","name":"Tariff Concession Order 0709061","slug":"tariff-concession-order-0709061","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":70227,"registerId":"commonwealth-F2007L03742-current","compilationNumber":null,"startDate":"2026-04-02","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 0709061","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Michael Perry, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 03.07.07 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n| 8503.00.00 | PARTS, DC ROLLING MILL MOTOR, being ANY of the following:(a) brush boxes;(b) carbon brushes;(c) main poles;(d) commutating poles;(e) pole pitches;(f) armature bars;(g) bearing labyrinths seals;(h) bearing shells;(i) couplings;(j) brush arm sets, comprising ALL of the following:(i) brush holders;(ii) brushes;(iii) springsOp. 03.07.07 - TC 0709061 | 50  |\n| ---------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |\n\n| This is page 1 of 1 Page of the above Table...Michael Perry........................Dated 14 September 2007 Delegate of the Chief Executive Officer |\n| -------------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"flash_summary_failed":{"failed":true,"reason":"Unauthenticated. Configure AI_GATEWAY_API_KEY or use a provider module. Learn more: https://ai-sdk.dev/unauthenticated-ai-gateway","source":"analysis-cron"},"flash_summary":{"complexity_score":2,"scope_assessment":{"changed":false,"description":"The instrument defines a targeted concession: it designates particular DC rolling mill motor parts and applies Schedule 4 Part III item 50 to them from 3 July 2007 until revoked. The text contains no amendment, exclusion, or extension beyond that designation, so there is no apparent change from its stated operative purpose in the instrument itself."},"complexity_factors":["Narrow technical scope: lists specific motor parts (brush boxes; carbon brushes; main poles; commutating poles; pole pitches; armature bars; bearing labyrinth seals; bearing shells; couplings; brush arm sets) — low breadth but requires correct classification (Column 1).","Statutory references: made under s.269P of the Customs Act 1901 and subject to revocation under ss.269SC and 269SD — requires understanding of those revocation mechanisms.","Linkage to tariff law: ties goods to Part III of Schedule 4 to the Customs Tariff Act 1995 (Item 50) — effect depends on that Schedule entry.","Precise tariff classification: entry cites tariff heading 8503.00.00; importers must match goods to that code to obtain the concession.","Administrative discretion: issued by a delegate of the CEO (signed by Michael Perry) — shows executive administrative action rather than legislation.","Temporal element: effective date specified (03.07.07) and continuation until revocation — impacts timing of compliance and import decisions."],"plain_english_summary":"This Tariff Concession Order (TCO 0709061) declares that specified parts for DC rolling mill motors (for example: brush boxes, carbon brushes, main poles, armature bars, couplings and brush arm sets) classified at tariff heading 8503.00.00 are covered by the concession in Part III of Schedule 4 to the Customs Tariff Act 1995 (item 50). The order took effect on 3 July 2007 and remains in force until revoked.\n\nIt changes the tariff treatment for importers of those parts; the order was made under s.269P of the Customs Act 1901 by a delegate of the Chief Executive Officer and may be revoked under ss.269SC or 269SD."},"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This is a standard, narrow tariff concession instrument with no indication of scope creep. It addresses a specific technical need (parts for DC rolling mill motors) without expanding into broader motor categories or unrelated goods."},"complexity_factors":["Single, narrow scope: only covers parts for DC rolling mill motors","Simple two-column table format with clear goods description","No nested exceptions or conditional logic — goods either match the description or they don't","Minimal cross-referencing: only references standard Customs Act and Tariff Act provisions (sections 269P, 269SC, 269SD, and Schedule 4 Item 50)","Short document: 1 page, approximately 200 words of substantive content","Straightforward effective date and revocation mechanism"],"plain_english_summary":"This Tariff Concession Order lets certain parts for DC rolling mill motors be imported into Australia at a reduced or zero customs duty, cutting input costs for rolling mills and importers while affecting competing local manufacturers. Effective 3 July 2007, it sits under the Customs Act 1901 and relates to tariff classification 8503.00.00, providing targeted trade relief until revoked or replaced."}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-0709061","history":"/api/acts/tariff-concession-order-0709061/history","analysis":"/api/acts/tariff-concession-order-0709061/analysis","conflicts":"/api/acts/tariff-concession-order-0709061/conflicts","importantCases":"/api/acts/tariff-concession-order-0709061/important-cases","documents":"/api/acts/tariff-concession-order-0709061/documents"}}