{"id":"F2007L00443","name":"Tariff Concession Order 0615052","slug":"tariff-concession-order-0615052","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":63574,"registerId":"commonwealth-F2007L00443-current","compilationNumber":null,"startDate":"2026-04-02","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 0615052","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Wendy Knowles, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 26.09.06 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n| 7210.70.00 | STEEL, high polymer polyester coated, complying with JapanIndustrial Standard G3312/SGCD1 (JIS G3312/SGCD1) AND EuropeanUnion Directive 2002/95/EC on the Restriction of the Use ofCertain Hazardous Substances in Electrical and ElectronicEquipment (RoHS), having ALL of the following:(a) epoxy reverse coating adhering to polyurethane;(b) specular gloss level NOT less than 80 units at 60 degrees;(c) distinction of image NOT less than 60 units;(d) surface having ALL of the following:(i) inclusions NOT greater than 0.2 mm over 1 squaremetre and having proximity NOT less than 400 mm;(ii) dents NOT greater than 0.3 mm over 1 square metreand having proximity NOT less than 400 mm;(iii) leveller bite NOT greater than 20 mm;(e) in ANY of the following sizes:(i) width 607 mm and gauge 0.5 mm;(ii) width 672 mm and gauge 0.5 mm;(iii) width 729 mm and gauge 0.5 mm;(iv) width 732 mm and gauge 0.5 mm;(v) width 774 mm and gauge 0.5 mm;(vi) width 824 mm and gauge 0.5 mm;(vii) width 924 mm and gauge 0.5 mm;For the purposes of this order, tolerances allowable forspecification (e) are:(a) width +2 mm;(b) gauge + or - 0.02 mmOp. 26.09.06 - TC 0615052 | 50  |\n| ---------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |\n\n| This is page 1 of 1 Page of the above Table...Wendy Knowles........................Dated 05 February 2007 Delegate of the Chief Executive Officer |\n| ------------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"kimi_summary":{"content_quality":"ok","complexity_score":4,"scope_assessment":{"changed":false,"description":"This is a standard, narrow tariff concession order. It has not expanded beyond its original purpose — it grants a duty concession for one very specific product category with tightly defined specifications. This is typical of how tariff concessions operate: they target particular goods rather than broad categories."},"complexity_factors":["Highly specific technical specifications with 7 distinct physical criteria (coating type, gloss level, image distinction, 3 surface defect limits, and 7 size variations)","Nested sub-paragraphs: paragraph (d) contains sub-paragraphs (i)-(iii), and paragraph (e) contains sub-paragraphs (i)-(vii)","External references to foreign standards: Japan Industrial Standard G3312/SGCD1 and EU Directive 2002/95/EC (RoHS)","Precise numerical tolerances with mathematical operators (+/- 0.02mm, 'NOT less than', 'NOT greater than')","Cross-reference to multiple sections of the Customs Act 1901 (sections 269P, 269SC, 269SD) and the Customs Tariff Act 1995 (Schedule 4, Part III)","Conditional logic: goods must satisfy ALL criteria in (a)-(d) and ANY of the size options in (e)"],"plain_english_summary":"This Tariff Concession Order grants a reduced customs duty for a narrowly defined high polymer polyester‑coated steel product that meets exact technical, size and environmental (RoHS/JIS) specifications.  \n\nIt matters to importers, Australian manufacturers using this specific steel, and customs officers: it lowers costs for qualifying imports but is tightly constrained—miss any requirement and the concession is lost, limiting competition and protecting local suppliers."},"flash_summary_failed":{"failed":true,"reason":"Unauthenticated. Configure AI_GATEWAY_API_KEY or use a provider module. Learn more: https://ai-sdk.dev/unauthenticated-ai-gateway","source":"analysis-cron"},"flash_summary":{"complexity_score":4,"scope_assessment":{"changed":false,"description":"The Order itself does not indicate any change to a prior scope. It narrowly grants Schedule 4, Part III item 50 treatment to goods meeting the stated specifications from 26.09.06 and remains in force until revoked under ss.269SC/269SD. No amendment, expiry date other than revocation, or broader scope expansion appears in the text."},"complexity_factors":["Narrow, technical product definition requiring verification against external standards named in the Order (JIS G3312/SGCD1) and RoHS compliance (THE TABLE).","Multiple precise physical tolerances, sizes and surface defect limits that raise measurement, testing and documentation needs (THE TABLE: specifications and tolerances).","Direct linkage to tariff classification code 7210.70.00 and application of Schedule 4, Part III item 50 (Column 1 and Column 2).","Legal authority and lifecycle mechanics: made under s.269P of the Customs Act 1901 and subject to revocation under ss.269SC or 269SD (order header).","Administrative and compliance burden on importers and customs to establish and record conformity before the concession can be claimed (implicit in the product specification requirement).","Delegated decision-making: instrument executed by a delegate of the CEO (Wendy Knowles), indicating administrative implementation and discretion (signature block)."],"plain_english_summary":"This Tariff Concession Order declares a narrowly defined polyester‑coated steel product (classified at 7210.70.00) eligible for the Schedule 4, Part III concession item 50, effective 26 September 2006 until revoked. It changes import duty treatment for that specific product. Importers and customs officers must verify the goods meet the detailed technical standards and tolerances before the concession applies, which affects import costs and compliance obligations."}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-0615052","history":"/api/acts/tariff-concession-order-0615052/history","analysis":"/api/acts/tariff-concession-order-0615052/analysis","conflicts":"/api/acts/tariff-concession-order-0615052/conflicts","importantCases":"/api/acts/tariff-concession-order-0615052/important-cases","documents":"/api/acts/tariff-concession-order-0615052/documents"}}