{"id":"F2005L03504","name":"Tariff Concession Order 0510513","slug":"tariff-concession-order-0510513","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":38945,"registerId":"commonwealth-F2005L03504-current","compilationNumber":null,"startDate":"2026-04-01","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 0510513","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Susan Campbell, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 09.08.05 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n| 7318.15.00 | WHEEL BOLTS, 22 MM x 90 MM (7/8 INCH x 3 1/2 INCH) UNF, knurledshank and nutOp. 09.08.05 - TC 0510513 | 50  |\n| ---------- | ----------------------------------------------------------------------------------------------------- | --- |\n\n| This is page 1 of 1 Page of the above Table...Susan Campbell.......................Dated 04 November 2005 Delegate of the Chief Executive Officer |\n| ------------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"},"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This is a standard, narrow tariff concession order covering a single specific product. It matches the original intent of the tariff concession system — to grant duty relief for specific imported goods where no local substitute exists. No scope creep evident."},"complexity_factors":["Single, highly specific product description (one type of wheel bolt with exact dimensions)","No defined terms section — relies on external references to the Customs Tariff Act 1995 and Customs Act 1901","Minimal conditional logic — straightforward declaration with standard revocation clauses","Very short document (1 page, 1 table entry)","No nested exceptions or complex cross-referencing within the instrument itself"],"plain_english_summary":"This Tariff Concession Order lets specific wheel bolts (22×90mm UNF, knurled shank with nut) enter Australia at a concessional (reduced or zero) customs duty rate under code 7318.15.00, effective 9 August 2005. It benefits importers by lowering costs and may increase competition for domestic manufacturers; it helps industries using these bolts obtain cheaper inputs where no equivalent local supplier exists."},"flash_summary":{"complexity_score":2,"scope_assessment":{"changed":false,"description":"This Order is a narrowly targeted, routine tariff concession covering a single specified product. It does not expand or repurpose the legal scheme beyond the original intent of tariff concession orders (to apply Schedule 4 concessions to specified imported goods). The instrument neither adds new powers nor changes the broader statutory framework; it only applies an existing Schedule 4 item to a particular type of wheel bolt."},"complexity_factors":["Single-item order (one product listed)","Short instrument text (one table row)","One external legislative reference to apply the concession: Part III, Schedule 4, item 50 of the Customs Tariff Act 1995","Made under one provision: section 269P of the Customs Act 1901","Revocation cross-references to two sections (269SC and 269SD) in the Customs Act","Technical dependency on tariff classification code 7318.15.00 (requires correct classification during customs processing)"],"plain_english_summary":"**What this instrument does (mechanically)**\n\n- Declares that a specific import — \"WHEEL BOLTS, 22 MM x 90 MM (7/8 INCH x 3 1/2 INCH) UNF, knurled shank and nut\" classified at tariff code 7318.15.00 — is a good to which the tariff concession listed at Part III of Schedule 4 to the Customs Tariff Act 1995, item number 50, applies.\n- The declaration is made under section 269P of the Customs Act 1901 by a delegate of the Chief Executive Officer (Susan Campbell). The Order took effect on 9 August 2005 and remains in force until revoked under sections 269SC or 269SD of the Customs Act or until any date specified in the table.\n\n**Who this affects**\n\n- Importers who bring in the specified wheel bolts: they can claim the tariff concession (that is, a reduced or zero customs duty that applies under the referenced Schedule 4 item), provided the imported goods match the description and classification.\n- Suppliers, distributors, and businesses that buy or sell these bolts in Australia: their input costs and sourcing decisions may be affected by the change in import duty.\n- Australian customs administrators: they must apply the concession when processing import declarations that meet the description and classification.\n- Domestic producers of similar bolts: they may face changed competitive conditions if import prices fall due to the concession.\n\n**Why it matters (purpose claim and practical trade-offs)**\n\n- The stated effect is to make the specified bolts eligible for the tariff concession at Schedule 4, Part III, item 50 of the Customs Tariff Act 1995. That ordinarily reduces the customs duty payable on imports that meet the description and classification.\n\n- Costs and incentives: importers pay less duty on qualifying bolts (direct benefit). The Commonwealth forgoes some tariff revenue for these specific imports (diffuse cost). Domestic producers of similar goods face stronger import competition (concentrated effect on particular businesses). Customs must ensure goods match the description and classification before allowing the concession (administrative compliance cost).\n\n- Behavioural effects: importers may switch suppliers or increase imports of the specified bolts to take advantage of lower duties; customs clearance and tariff classification practices must be followed to claim the concession.\n\n**How it works in practice / compliance notes**\n\n- The concession applies only to goods that match the written description and the tariff classification shown (7318.15.00). Import documentation must support that match.\n- The Order stays effective until it is revoked under the procedures in the Customs Act (sections 269SC or 269SD). That gives the Commissioner/delegate administrative discretion to revoke later if conditions change.\n- The instrument relies on external law for operation: the applicable rate and precise legal effect are determined by the referenced Schedule 4, Part III, item 50 of the Customs Tariff Act 1995 and the operation of the Customs Act 1901.\n\n**Key legal citations in the instrument**\n\n- Made under section 269P of the Customs Act 1901.\n- Revocation power under sections 269SC and 269SD of the Customs Act 1901.\n- Concession referenced: Part III of Schedule 4 to the Customs Tariff Act 1995, item 50.\n\n(Details from the instrument: product description — wheel bolts 22 mm x 90 mm UNF with knurled shank and nut; tariff code 7318.15.00; effective date 09.08.2005; instrument delegate Susan Campbell, dated 4 November 2005.)"}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-0510513","history":"/api/acts/tariff-concession-order-0510513/history","analysis":"/api/acts/tariff-concession-order-0510513/analysis","conflicts":"/api/acts/tariff-concession-order-0510513/conflicts","importantCases":"/api/acts/tariff-concession-order-0510513/important-cases","documents":"/api/acts/tariff-concession-order-0510513/documents"}}