{"id":"plumbers-gas-fitters-and-electricians-regulations-2025","name":"Plumbers, Gas Fitters and Electricians Regulations 2025","slug":"plumbers-gas-fitters-and-electricians-regulations-2025","collection":"regulation","jurisdiction":"sa","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":236253,"registerId":"sa-plumbers-gas-fitters-and-electricians-regulations-2025-current","compilationNumber":null,"startDate":"2026-04-06","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Plumbers, Gas Fitters and Electricians Regulations 2025","content":"South Australia\nPlumbers, Gas Fitters and Electricians Regulations 2025\nunder the Plumbers, Gas Fitters and Electricians Act 1995\n\nContents\nPart 1—Preliminary\n1\tShort title\n2\tCommencement\n3\tInterpretation\n4\tExemptions\nPart 2—Licensed contractors\n5\tEntitlement to be licensed as contractor—qualifications\n6\tPeriodic fee and return\n7\tNotification of change in circumstances etc\n8\tReturn etc of licence\nPart 3—Registered workers\n9\tEntitlement to be registered as worker—qualifications\n10\tPeriodic fee and return\n11\tNotification of change in circumstances\n12\tReturn etc of certificate of registration\nPart 4—Miscellaneous\n13\tRequirements for contracts for domestic plumbing, gas fitting or electrical work that contain a charging clause\n14\tProvisions relating to fees\nSchedule 1—Forms\nSchedule 2—Repeal of Plumbers, Gas Fitters and Electricians Regulations 2010\nLegislative history\n\nPart 1—Preliminary\n1—Short title\nThese regulations may be cited as the Plumbers, Gas Fitters and Electricians Regulations 2025.\n2—Commencement\nThese regulations come into operation on the day on which they are made.\n3—Interpretation\n\t(1)\tIn these regulations—\nAct means the Plumbers, Gas Fitters and Electricians Act 1995;\nregistered training organisation means a registered training organisation within the meaning of the National Vocational Education and Training Regulator Act 2011 of the Commonwealth.\n\t(2)\tFor the purposes of these regulations, a reference to a qualification, course or subject conferred or offered by a particular institution includes a reference to a qualification, course or subject of a different name conferred or offered by that institution and certified by that institution to be an equivalent qualification, course or subject.\n4—Exemptions\n\t(1)\tA person who—\n\t(a)\tcarries on business as a builder, building contractor or architect; or\n\t(b)\tcarries on another business the principal purpose of which is the construction, installation, alteration, repair or maintenance of a building, structure, plant or equipment,\nis exempt from the requirement to be licensed under the Act as a contractor subject to the condition that any plumbing, gas fitting or electrical work performed by the person is performed in the ordinary course of the business by a person authorised by licence or registration under the Act to perform or carry out work of that kind.\n\t(2)\tA person carrying out electrical work relating to electricity infrastructure owned or operated by an electricity entity that is required to have a safety, reliability, maintenance and technical management plan by condition of licence, or by the regulations, under the Electricity Act 1996 is exempt from the requirement to be registered under the Act as an electrical worker.\n\t(3)\tAn employee of The Smith's Snackfood Company Ltd (ACN 057 976 940) (the Company) is exempt from the requirement to be registered under the Act as a plumbing worker in respect of cold water plumbing carried out in the course of their employment in relation to any food processing plant or associated pipes or equipment downstream from a secondary testable backflow prevention device that is downstream from the primary testable backflow prevention device connecting the Company's pipes and equipment at the Company's site at 553‑567 South Road, Regency Park, 5010 to the public water supply system.\n\t(4)\tA licensed contractor is exempt from the application of section 12 of the Act in relation to work performed in the course of the contractor's business by a person exempted from the requirement to be registered under the Act in relation to that work.\n\t(5)\tThe following work is exempt from the application of the Act:\n\t(a)\tplumbing—\n\t(i)\tconsisting of the installation, alteration, repair, maintenance or disconnection of a cold water pipe not exceeding 25 mm in diameter except where the pipe is in or on a building; or\n\t(ii)\tconsisting of the installation, alteration, repair, maintenance or disconnection of a non‑testable backflow prevention device; or\n\t(iii)\tconsisting of the replacement, alteration, repair, maintenance or disconnection of domestic tapware; or\n\t(iv)\tconsisting of the clearing of blockages in pipes not exceeding 50 mm in diameter (or associated traps) installed to convey wastewater to sanitary drains; or\n\t(v)\trelating to stormwater drainage pipes—\n\t(A)\tconsisting of work on pipes not exceeding 90 mm in diameter; or\n\t(B)\tconsisting of work carried out under the supervision of a professional civil engineer;\n\t(b)\tgas fitting—\n\t(i)\tconsisting of connecting or disconnecting a gas cylinder and portable equipment that utilises gas contained in the cylinder; or\n\t(ii)\tin respect of which a permit is required under the Dangerous Substances (General) Regulations 2017 if carried out by the holder of such a permit;\n\t(c)\telectrical work—\n\t(i)\tconsisting of the oiling, greasing, cleaning or painting of an electrical installation; or\n\t(ii)\tconsisting of the installation, alteration, repair or maintenance of an electrical installation—\n\t(A)\tthat is situated outside of a municipality or township if the installation is used in connection with the carrying on of the business of primary production; or\n\t(B)\tthe purpose of which is to transmit television or radio programs from a television or radio station; or\n\t(iii)\tconsisting of the installation, alteration, repair or maintenance of any system or equipment connected or intended to be connected to and beyond an electrical outlet socket at which fixed wiring terminates, but not including the alteration, repair or maintenance of an electrical connection of a rating above low voltage (as defined in AS/NZS 3000:2018 Electrical installations); or\n\t(iv)\tconsisting of the replacement of a fuse, switch or two‑point outlet socket other than any such equipment or device belonging to a person or body that supplies electricity to the public; or\n\t(v)\tinvolved in the manufacture or assembling of new equipment; or\n\t(vi)\tconsisting of the repair of used equipment for resale when carried out at a workshop of a retailer or wholesaler of equipment of that kind under the supervision (which must include personal checking and approval of each item before resale) of a registered electrical worker authorised by registration to carry out electrical work of that kind without supervision; or\n\t(d)\tany work involved in educational courses or in scientific research or experiments.\n\t(6)\tIn this regulation—\nbusiness of primary production has the same meaning as in the Land Tax Act 1936;\nelectricity entity means—\n\t(a)\tthe holder of a licence under the Electricity Act 1996 authorising the generation of electricity or the operation of a transmission or distribution network; or\n\t(b)\ta person exempted from the requirement to hold such a licence;\nelectricity infrastructure has the same meaning as in the Electricity Act 1996;\nmunicipality means the area of a municipal council (within the meaning of the Local Government Act 1999);\ntownship has the same meaning as in the Local Government Act 1999.\nPart 2—Licensed contractors\n5—Entitlement to be licensed as contractor—qualifications\nFor the purposes of section 9(1) of the Act—\n\t(a)\tto be entitled to be granted a plumbing contractors licence (not subject to conditions limiting the work that may be performed under the authority of the licence) a natural person must—\n\t(i)\thold a Certificate of Competency in Sanitary Plumbing or a Certificate of Competency—Advanced Plumbing issued by the Sanitary Plumbers Examining Board and have completed—\n\t(A)\t6 years of plumbing including at least 2 years as—\n\t•\tthe holder of a certificate of registration as a sanitary plumber issued by the Sanitary Plumbers Examining Board; or\n\t•\ta registered plumbing worker; or\n\t(B)\t7 years of plumbing including at least 18 months as—\n\t•\tthe holder of a certificate of registration as a sanitary plumber issued by the Sanitary Plumbers Examining Board; or\n\t•\ta registered plumbing worker; or\n\t(ii)\thold a Certificate of Proficiency and a Certificate of Competency in Sanitary Plumbing, Draining and Water Plumbing issued by the Regency Institute of TAFE or a registered training organisation and have successfully completed subjects relating to business administration approved by the Commissioner; and\n\t(b)\tto be entitled to be granted a gas fitting contractors licence (not subject to conditions limiting the work that may be performed under the authority of the licence) a natural person must—\n\t(i)\thold a Certificate of Competency in Gas Fitting issued by the Gas Fitters Examining Board; or\n\t(ii)\thold a Certificate of Proficiency and a Certificate of Competency in Gas Fitting issued by the Regency Institute of TAFE or a registered training organisation, including successful completion of subjects relating to business administration approved by the Commissioner; and\n\t(c)\tto be entitled to be granted an electrical contractors licence (not subject to conditions limiting the work that may be performed under the authority of the licence) a natural person must hold a Certificate in Electrical Stream 3212 issued by a training provider approved by the Commissioner (including passes in modules required by the Commissioner) and—\n\t(i)\ta Certificate of Competency in Electrical Mechanics; or\n\t(ii)\ta Certificate of Competency in Electrical Fitting; or\n\t(iii)\ta Certificate of Competency in Engineering Tradesperson (Electrical/Electronic),\nissued by the Industrial and Commercial Training Commission and have successfully completed subjects relating to business administration approved by the Commissioner.\n6—Periodic fee and return\nFor the purposes of section 11(2) of the Act, a licensed contractor must pay the fee and lodge the return on or before—\n\t(a)\tthe last day of the month in each year nominated in writing to the contractor by the Commissioner; or\n\t(b)\tif the Commissioner does not nominate a month—the last day of the month in each year that is the same month as the month in which the contractor's licence was granted or, if the contractor holds more than 1 licence under the Act, the month in which the contractor was granted the first of those licences.\n7—Notification of change in circumstances etc\n\t(1)\tIf there is any change in—\n\t(a)\tthe residential address of a licensed contractor; or\n\t(b)\tthe postal or email address of a licensed contractor provided to the Commissioner for purposes connected with the licence; or\n\t(c)\tthe business or trading name under which a licensed contractor carries on business; or\n\t(d)\tthe address at which a licensed contractor carries on business; or\n\t(e)\tthe address of the registered corporate office of a licensed contractor that is a body corporate,\nthe contractor must, within 14 days after that change, give written notice to the Commissioner of the new address or name (as the case may be).\nMaximum penalty: $2 500.\nExpiation fee: $160.\n\t(2)\tA licensed contractor must, within 14 days after ceasing to carry on business as a contractor, give written notice to the Commissioner of that fact.\nMaximum penalty: $2 500.\nExpiation fee: $160.\n\t(3)\tA licensed contractor must, within 14 days after entering into partnership to carry on business as a contractor or ceasing to be in such a partnership, give written notice to the Commissioner of that fact, together with the names of the members of the new or former partnership.\nMaximum penalty: $2 500.\nExpiation fee: $160.\n\t(4)\tIf a person is appointed as a director of a body corporate that is a licensed contractor, the contractor must, within 14 days after the appointment—\n\t(a)\tnotify the Commissioner in the manner and form approved by the Commissioner of the appointment of the new director; and\n\t(b)\tprovide the Commissioner with any information required by the Commissioner for the purposes of determining whether the new director meets the requirements for directors under section 9(2) of the Act.\nMaximum penalty: $2 500.\nExpiation fee: $160.\n8—Return etc of licence\n\t(1)\tIf a contractor's licence is surrendered, suspended or cancelled, the contractor must, at the direction of the Tribunal or the Commissioner, return the licence to the Commissioner.\nMaximum penalty: $2 500.\nExpiation fee: $160.\n\t(2)\tIf, on an application under section 8 of the Act, a licence has been issued to a contractor but the fee payable in respect of the application has not been paid (whether because of the dishonouring of a cheque or otherwise), the contractor must, at the direction of the Commissioner, return the licence to the Commissioner.\nMaximum penalty: $2 500.\nExpiation fee: $160.\n\t(3)\tThe Commissioner may issue to a licensed contractor a licence in replacement of a current licence if satisfied that—\n\t(a)\tthe current licence has been lost, destroyed or damaged; or\n\t(b)\tany photograph of the contractor on the current licence should be replaced with a more recent photograph of the contractor; or\n\t(c)\tany particulars appearing on the current licence are incorrect.\n\t(4)\tIf the Commissioner issues to a licensed contractor a replacement licence, the contractor must, at the direction of the Commissioner, return the original (or previous duplicate) licence to the Commissioner.\nMaximum penalty: $2 500.\nExpiation fee: $160.\nPart 3—Registered workers\n9—Entitlement to be registered as worker—qualifications\nFor the purposes of section 16 of the Act—\n\t(a)\tto be entitled to be granted plumbing workers registration (not subject to conditions limiting the work that may be carried out under the authority of the registration) a natural person must—\n\t(i)\thold a Certificate of Competency in Sanitary Plumbing or a Certificate of Competency in Advanced Plumbing issued by the Sanitary Plumbers Examining Board and have completed—\n\t(A)\t6 years of plumbing including at least 2 years as—\n\t•\tthe holder of a certificate of registration as a sanitary plumber issued by the Sanitary Plumbers Examining Board; or\n\t•\ta registered plumbing worker; or\n\t(B)\t7 years of plumbing including at least 18 months as—\n\t•\tthe holder of a certificate of registration as a sanitary plumber issued by the Sanitary Plumbers Examining Board; or\n\t•\ta registered plumbing worker; or\n\t(ii)\thold a Certificate of Proficiency and a Certificate of Competency in Sanitary Plumbing, Draining and Water Plumbing issued by the Regency Institute of TAFE or a registered training organisation; and\n\t(b)\tto be entitled to be granted gas fitting workers registration (not subject to conditions limiting the work that may be carried out under the authority of the registration) a natural person must—\n\t(i)\thold a Certificate of Competency in Gas Fitting issued by the Gasfitters Examining Board; or\n\t(ii)\thold a Certificate of Proficiency and a Certificate of Competency in Gas Fitting issued by the Regency Institute of TAFE or a registered training organisation; and\n\t(c)\tto be entitled to be granted electrical workers registration (not subject to conditions limiting the work that may be carried out under the authority of the registration) a natural person must hold a Certificate in Electrical Stream 3212 issued by a training provider approved by the Commissioner (including passes in modules required by the Commissioner) and—\n\t(i)\ta Certificate of Competency in Electrical Mechanics; or\n\t(ii)\ta Certificate of Competency in Electrical Fitting; or\n\t(iii)\ta Certificate of Competency in Engineering Tradesperson (Electrical/Electronic),\nissued by the Industrial and Commercial Training Commission.\n10—Periodic fee and return\n\t(1)\tFor the purposes of section 18(2) of the Act, a registered worker must pay the fee and lodge the return in every third year on or before—\n\t(a)\tthe last day of the month nominated in writing to the worker by the Commissioner; or\n\t(b)\tif the Commissioner does not nominate a month—the last day of the month that is the same month as the month in which the worker's registration was granted or, if the worker holds more than 1 registration under the Act, the month in which the worker was granted the first of those registrations.\n\t(2)\tHowever, a registered worker who is also a licensed contractor—\n\t(a)\tmust, instead of lodging the return as required by subregulation (1), lodge the return in each year at the same time that they lodge a return under regulation 6; and\n\t(b)\tis, on payment of a fee under regulation 6, exempt from paying the fee referred to in subregulation (1).\n11—Notification of change in circumstances\nIf there is any change in—\n\t(a)\tthe name or residential address of a registered worker; or\n\t(b)\tthe postal or email address of a registered worker provided to the Commissioner for purposes connected with their registration,\nthe worker must, within 14 days after that change, give written notice to the Commissioner of the new name or address (as the case requires).\nMaximum penalty: $1 250.\nExpiation fee: $80.\n12—Return etc of certificate of registration\n\t(1)\tIf registration of a person as a worker is surrendered, suspended or cancelled, the person must, at the direction of the Tribunal or the Commissioner, return the certificate of registration to the Commissioner.\nMaximum penalty: $1 250.\nExpiation fee: $80.\n\t(2)\tIf, on an application under section 15 of the Act, a certificate of registration has been issued to a worker but the fee payable in respect of the application has not been paid (whether because of the dishonouring of a cheque or otherwise), the worker must, at the direction of the Commissioner, return the certificate of registration to the Commissioner.\nMaximum penalty: $2 500.\nExpiation fee: $160.\n\t(3)\tThe Commissioner may issue to a registered worker a certificate of registration in replacement of a current certificate of registration if satisfied that—\n\t(a)\tthe current certificate has been lost, destroyed or damaged; or\n\t(b)\tany photograph of the worker on the current certificate should be replaced with a more recent photograph of the worker; or\n\t(c)\tany particulars appearing on the current certificate are incorrect.\n\t(4)\tIf the Commissioner issues to a registered worker a replacement certificate of registration, the worker must, at the direction of the Commissioner, return the original (or previous duplicate) certificate to the Commissioner.\nMaximum penalty: $2 500.\nExpiation fee: $160.\nPart 4—Miscellaneous\n13—Requirements for contracts for domestic plumbing, gas fitting or electrical work that contain a charging clause\n\t(1)\tFor the purposes of section 33B(1)(d) of the Act, a contract entered into to perform plumbing, gas fitting or electrical work on domestic property that contains a charging clause must include the following information:\n\t(a)\tthat the clause seeks to establish an interest in the property to which the contract relates for which a right to lodge a caveat over the property will exist;\n\t(b)\tthat, in the event that a caveat is lodged over the property, the rights of the owner of the property to deal with the property and have such dealings registered in the Lands Titles Office will be restricted;\n\t(c)\tthat the interest in the property created by the clause entitles the contractor to apply to a court for the sale of the property for the purposes of recovering any debt that may be outstanding in relation to the contract;\n\t(d)\tthat the person entering into the contract is advised to seek independent legal advice in relation to the clause.\n\t(2)\tFor the purposes of section 33B(1)(f) of the Act, the form and information of Form 1 in Schedule 1 are prescribed.\n14—Provisions relating to fees\n\t(1)\tThe Commissioner may waive, reduce or refund a fee (or part of a fee) prescribed for the purposes of the Act if satisfied that it is appropriate to do so in a particular case.\n\t(2)\tA contractor who applies at any 1 time for more than 1 licence under the Act is required to pay only 1 application fee regardless of the number of applications.\n\t(3)\tA licensed contractor under the Act who applies for a further licence under the Act must pay the application fee in respect of each such application.\n\t(4)\tA contractor who holds more than 1 licence under the Act is required to pay only 1 periodic fee regardless of the number of such licences held.\n\t(5)\tA worker who applies at any 1 time for more than 1 registration under the Act is required to pay only 1 application fee regardless of the number of applications.\n\t(6)\tA registered worker under the Act who applies for a further registration under the Act must pay the application fee in respect of each such application.\n\t(7)\tA worker who holds more than 1 registration under the Act is required to pay only 1 periodic fee regardless of the number of such registrations held.\nSchedule 1—Forms\nForm 1—Notice of charging clause—section 33B(1)(f) of Plumbers, Gas Fitters and Electricians Act 1995\nThis notice contains important information about the charging clause contained in the contract entered into to perform plumbing, gas fitting or electrical work on your domestic property by a contractor. You should read it carefully and keep it for future reference.\nA charging clause in a contract gives your contractor the right to lodge a caveat over the property on which the contractor is performing work under the contract. If a caveat is lodged over the property, you (as owner of the property) may be restricted from dealing with and registering dealings with the property at the Land Titles Office.\nThe interest created by the clause would entitle your contractor to apply to the court for the sale of the property to recover any debt owed by you for work performed under the contract.\nCheck your contract carefully, and, if you are not certain about the implications of a charging clause, you should seek independent legal advice.\nSchedule 2—Repeal of Plumbers, Gas Fitters and Electricians Regulations 2010\nThe Plumbers, Gas Fitters and Electricians Regulations 2010 are repealed.\nLegislative history\nNotes\n\t•\tFor further information relating to the Act and subordinate legislation made under the Act see the Index of South Australian Statutes or www.legislation.sa.gov.au.\nPrincipal regulations\nYear\nNo\nReference\nCommencement\n2025\n86\nGazette 7.8.2025 p3179 \n7.8.2025: r 2\n","sortOrder":0}],"analysis":{"issue_detection":{"absurdities":[],"contradictions":[]},"summary":{"complexity_score":1,"scope_assessment":{"changed":false,"description":"Scope cannot be assessed as no legislative text was available for analysis. The submission contained only a 'Page Not Found' error from the SA legislation website, with no regulatory provisions, definitions, or operative clauses present."},"complexity_factors":["No legislative text was retrievable — only a website error page was provided","Complexity cannot be meaningfully assessed without access to the actual regulations","Score of 1 reflects absence of content, not simplicity of the law itself"],"plain_english_summary":"The requested Plumbers, Gas Fitters and Electricians Regulations 2025 (SA) could not be retrieved due to a \"Page Not Found\" error on the SA legislation site, so the instrument’s text—and thus any clear summary of rights, obligations or impacts on plumbers, gas fitters and electricians—cannot be provided. This matters because these regulations would set rules for those trades in South Australia. To obtain the text, search legislation.sa.gov.au, check the SA Government Gazette, or contact OPCWeb@sa.gov.au about the broken link."},"flash_summary":{"complexity_score":6,"scope_assessment":{"changed":true,"description":"Schedule 2 repeals the 2010 Regulations and replaces them with a new, detailed regulatory scheme. The 2025 Regulations specify new or clarified qualification routes, a range of technical exemptions (including a single‑employer exemption), consolidated fee‑payment rules for persons holding both licences and registrations, required notices for domestic charging clauses, and precise administrative duties and penalties (see regs 4, 5, 6, 10, 13, Schedule 1). Those elements alter the subordinate‑law detail that determines who is regulated and the administrative burdens they face compared with the prior instrument."},"complexity_factors":["Multiple alternative qualification pathways with conditional time‑in‑trade requirements for contractors and workers (regs 5 and 9).","Detailed, size‑ and context‑based exemptions across plumbing, gas fitting and electrical work (including pipe diameters, equipment types and primary‑production exceptions) that require technical interpretation (reg 4(5)).","A bespoke, named corporate exemption for a single employer (The Smith's Snackfood Company Ltd) creating an unusual, specific carve‑out (reg 4(3)).","Differing periodic fee and return timing and consolidation rules (annual for contractors, every third year for workers, with merged filing for dual‑status persons) and fee waiver/discretion powers (regs 6, 10, 14).","Multiple procedural compliance duties—notification of changes, partnership/director reporting, surrender/return of licences and certificates—each carrying specified maximum penalties and expiation fees (regs 7, 8, 11, 12).","Cross‑references to the principal Act, other South Australian Acts and external standards or boards (eg. Sanitary Plumbers Examining Board, Industrial and Commercial Training Commission, AS/NZS 3000:2018), increasing interpretative dependency (regs 3, 5, 9, 4(6)).","A prescribed consumer notice and form for contracts with charging clauses, which creates specific disclosure obligations in domestic contracts and links to land title consequences (reg 13 and Schedule 1).","Repeal of the 2010 Regulations (Schedule 2) which may introduce transitional or substantive changes relative to the prior regulatory instrument."],"plain_english_summary":"These regulations set the practical rules for plumbers, gas fitters and electricians in South Australia. They prescribe who qualifies for contractor licences and worker registrations, list specific exemptions, set timing and payment rules for periodic fees and returns, impose notification and certificate‑return duties with penalties, and require a prescribed consumer notice where a contract creates a charging clause over domestic property. The measures affect individual tradespeople, contractor businesses and domestic customers by defining legal entitlements, administrative obligations and what must appear in contracts."},"kimi_summary":{"content_quality":"ok","complexity_score":5,"scope_assessment":{"changed":false,"description":"The legislation appears consistent with its original purpose of regulating plumbing, gas fitting and electrical work. While it includes a highly specific exemption for one snack food company, this appears to be a continuation of existing practice rather than scope creep. The core framework remains focused on licensing, registration, qualifications and consumer protection."},"complexity_factors":["Multiple nested qualification pathways with alternative requirements (e.g., 6 years with 2 years registered OR 7 years with 18 months registered)","Extensive exemption provisions in regulation 4 with five sub-categories of exempt work, each with multiple sub-paragraphs and technical conditions (e.g., pipe diameter limits, voltage ratings referencing AS/NZS 3000:2018)","Cross-references to at least 6 other Acts (Plumbers, Gas Fitters and Electricians Act 1995, National Vocational Education and Training Regulator Act 2011, Electricity Act 1996, Dangerous Substances (General) Regulations 2017, Land Tax Act 1936, Local Government Act 1999)","Conditional fee structures with multiple exceptions (regulation 14: multiple licences = one fee, but further licences = separate fees)","Specific individual exemption for one company (The Smith's Snackfood Company Ltd) with precise address and technical conditions","Dual penalty structures (maximum penalties plus expiation fees) throughout Parts 2 and 3"],"plain_english_summary":"**What this legislation does:**\n\nThese regulations set out the detailed rules for who can work as a plumber, gas fitter or electrician in South Australia, and how they must operate. They replace the 2010 regulations with updated requirements.\n\n**Who it affects:**\n\n- **Licensed contractors** — businesses or individuals who run their own plumbing, gas fitting or electrical businesses\n- **Registered workers** — employees who carry out this work under supervision\n- **Homeowners** — anyone getting domestic plumbing, gas or electrical work done\n- **Specific exempt groups** — including builders, electricity network operators, and oddly, employees of The Smith's Snackfood Company at their Regency Park site (for specific cold water plumbing work)\n\n**Key requirements:**\n\n- **Qualifications:** Sets out exactly what certificates and experience you need to get a licence or registration. For example, plumbers need either 6-7 years of experience plus specific competency certificates, or TAFE qualifications plus business administration subjects.\n- **Fees and paperwork:** Contractors must pay annual fees and lodge returns; workers pay every three years (unless they're also contractors, then it's annual).\n- **Keeping details current:** Both contractors and workers must notify the Commissioner within 14 days of changes to addresses, business names, or company directors.\n- **Contract protections:** If a contractor includes a \"charging clause\" in a domestic contract (which lets them claim a legal interest in your property as security for payment), they must give you a specific warning notice explaining you could lose your home if you don't pay, and advising you to get legal advice.\n- **Exemptions:** Lists work that doesn't need a licence — mostly minor jobs like replacing tapware, clearing small drain blockages, connecting portable gas cylinders, or basic electrical maintenance like oiling and painting installations.\n\n**Why it matters:**\n\nThese rules protect public safety by ensuring only qualified people work on essential services like water, gas and electricity. They also protect homeowners from predatory contract terms by forcing contractors to clearly explain when they're taking a legal charge over the property. The specific exemption for Smith's Snackfood employees shows how regulations sometimes include bespoke carve-outs for particular businesses."},"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"}},"importantCases":[],"_links":{"self":"/api/acts/plumbers-gas-fitters-and-electricians-regulations-2025","history":"/api/acts/plumbers-gas-fitters-and-electricians-regulations-2025/history","analysis":"/api/acts/plumbers-gas-fitters-and-electricians-regulations-2025/analysis","conflicts":"/api/acts/plumbers-gas-fitters-and-electricians-regulations-2025/conflicts","importantCases":"/api/acts/plumbers-gas-fitters-and-electricians-regulations-2025/important-cases","documents":"/api/acts/plumbers-gas-fitters-and-electricians-regulations-2025/documents"}}