{"id":"F2006B11614","name":"Australia New Zealand Closer Economic Relations Trade Agreement - Determined Manufactured Raw Materials Notice No. 2002/2","slug":"f2006b11614","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":323992,"registerId":"commonwealth-F2006B11614-current","compilationNumber":null,"startDate":"2026-04-08","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"CUSTOMS ACT 1901 - SECTION 153J","sectionType":"part","heading":"CUSTOMS ACT 1901 - SECTION 153J","content":"# CUSTOMS ACT 1901 - SECTION 153J\n\nAUSTRALIA NEW ZEALAND CLOSER ECONOMIC RELATIONS TRADE AGREEMENT\n\nDETERMINED MANUFACTURED RAW MATERIALS\n\nNOTICE NO. 2002/2\n\nI, John Peter Arndell, delegate of the Chief Executive Officer, pursuant to paragraph 153J(1)(c) of the Customs Act 1901, determine the following materials to be manufactured raw materials of New Zealand:\n\nMaterials\n\n| Alkaline extracted Ossein Gelatin BP 150 Bloom with NOT more than 15 PPM sulphur dioxide, NOT more than 15 PPM iron and colour of 43% mass does NOT exceed 8 using Lovibond No. 3 Colour Comparitor with Gardner Disc. |\n| --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| Aluminium oxide grain, grit size 16-600 |\n| Aluminium pigment, leafing type, in powder form - Aluminium Powder GGT |\n| Aminobenzoic acid, British Pharmacopoeia 1980 Addendum 1982 or United States Pharmocopoeia XX Grade, no particle greater than 180 micron in diameter |\n| Ammonium Persulphate |\n| Ascorbic acid, British Pharmacopoeia 1980 Addendum 1982 or United States Pharmocopoeia XX Grade, no particle greater than 180 micron in diameter. |\n| Azinphos Ethyl Technical |\n| Azinphos Methyl Technical |\n| Benzoin |\n| Bi-metal hacksaw blanks 12\" x 0.5\" x 0.025\" comprising high speed steel (M2 quality) cutting edge electron beam welded to a spring steel back (EN 47 quality), supplied in the annealed condition with radiused ends and punched pin holes |\n| Biotin, Food and Chemicals Codex Third Edition, no particle greater than 180 micron diameter |\n| Blended Alkali extracted Ossein acid extracted Pigskin Gelatin BP 150 Bloom with NOT more than 40 PPM sulphur dioxide, NOT more than 15 PPM iron and colour of 45% mass does NOT exceed 8 using Lovibond No. 3 Colour Comparitor with Gardner Disc. |\n| Brass blanks, unfinished, assembled and polished of a kind used for the manufacture of silver plated ware |\n| Bronze powder pigment |\n| Calcium Formate |\n| Calcium lignosulphonate |\n| Calcium Pantothenate, United States Pharmacopoeia XX Grade, no particle greater than 180 micron diameter |\n\n \nMaterials\n\n| Captan Technical |\n| ------------------------------------------------------------------------------------------------------------------------------------------------------------------ |\n| Carbaryl Technical (1-Naphtyl Methyl Carbamate) |\n| Carbon black pigment |\n| Celite 209 (diatomatious earth) |\n| Centrefire projectiles |\n| Chinese gum resin |\n| Chlorophyll, oil soluble, coppered containing between 14.6% and 15.8% W/W Copper Phaeophytin |\n| Choline Bitartrate, Food Chemicals Codex Third Edition, no particle greater than 180 microns in diameter |\n| Chromium oxide green pigment |\n| CIBA Geigy powder coating matting agent XG 125 |\n| Cocoa butter |\n| Cocoa licor |\n| Cocoa paste, NOT defatted |\n| Copper powder |\n| Crude coconut oil |\n| Cyanocobalamin, British Pharmacopoeia 1980 Grade, diluted to 0.1% with Mannitol, hydrolysed gelatin or vegetable gum, no particle greater than 180 micron diameter |\n| Cyanocobalamin, British Pharmacopoeia 1980 Grade, diluted to 1% with Mannitol, hydrolysed gelatin or vegetable gum, no particle greater than 180 micron diameter |\n| d1-Alpha Tocopherol Acetate, British Pharmocopoeia 1980 or United States Pharmocopoeia XX Grade |\n| d-Alpha Tocopherol, 67%, meeting the following specifications - contains NOT less than 670mg of d-Alpha Tocopherol per gram |\n| d-Alpha-Tocopherol Acetate, 80%, meeting the following specifications - contains from 80% W/W to 86% W/W of d-Alpha Tocopherol Acetate |\n| DDT Technical |\n| Diazinon Technical |\n| DI-Methionine, Food Chemicals Codex Third Edition, no particle greater than 180 micron in diameter. |\n| Dinocap Technical |\n| Dodine Technical |\n| Dowfax 2A1 (sodium salt of Diphenyl Oxide Alkyl Sulphonate) |\n| Down-proof fabric as used in the manufacture of sleeping bags, sleeping bags with inserts as a set and down blankets |\n| Dyestuffs for dyeing triacetate yarn |\n| Endosulfan Technical |\n| Fabric, specially prepared or coated, for use in the manufacture of emery cloth |\n\n \nMaterials\n\n| Fenitrothion Technical |\n| -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| Forks and spoons, nickel silver, unfinished NOT polished or plated, but NOT including unfinished forks or spoons of the souvenir or commerative types, for use in the manufacture of silver plated ware |\n| Ginseng root powder, the dried root of Panax Ginseng |\n| Ginseng, Siberian Extract, 5:1 meeting ALL of the following:(a) fine buff-coloured, hygroscopic powder;(b) loss on drying NOT more than 10% W/W at 105C for two hours |\n| Hot rolled black annealed high speed steel strips (M2 quality) in the as sheared condition 12.624\" x 0.515\" x 0.025\", suitable for producing finished hacksaw blades 12\" x 0.5\" x 0.025\" |\n| Hot rolled black annealed high speed steel strips (M2 quality) in the as sheared condition suitable for producing ALL sizes of hacksaw blades |\n| Hydrogenated castor oil |\n| Imitation glass stones (minimum 24% lead oxide by weight) |\n| Incoloy 800 and 825 strip, nickel iron alloy |\n| Inositol, Food Chemicals Codex Third Edition Grade, with no particle having a diameter greater than 180 micron |\n| Japara oiled cotton cloth |\n| Knife blanks, nickel silver or copper alloy, NOT plated, for use in the manufacture of silver plated cutlery |\n| Lecithin, Food Chemicals Codex Third Edition Grade with ALL of the added specifications:(a) Acetone insoluble matter - NOT less than 60% W/W(b) Hexane insoluble matter - NOT less than 0.05%(c) water content NOT more than 0.75% W/W |\n| Lindane Technical |\n| Long residue feedstock |\n| Low alloy hand blade blanks of carbon silicon strip for hacksaw blades |\n| Maleic Anhydride |\n| Marasperse CBOS - 3 (Sodium lignosulphonate) |\n| Marasperse N22 (Calcium lignosulphonate) |\n| Methyl Methacrylate Monomer, Methyl Acrylate Monomer, Methacrylic acid, Butyl Acrylate Monomer and 2 Ethyl Hexyl Acrylate Monomer for use other than in the manufacture of paints and lacquers sold or prepared for use or sale as household or architectural paints |\n| Microcel E - synthetic Calcium Silicate |\n| Micronised Polyolefin wax |\n| Micronised Polypropylene wax |\n| n. Decanol (fatty alcohol) |\n\n \nMaterials\n\n| Natural Barium Sulphate |\n| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| Nickel copper alloy, annealed in strip sizes:0.46mm thick by 131mm wide;0.56mm thick by 131mm wide;0.61mm thick by 131mm wide;0.71mm thick by 131mm wide; |\n| Nickel Titanate yellow pigment |\n| Nicotinamide, British Pharmacopoeia 1980 or United States Pharmacopoeia XX Grade, no particle greater than 180 micron diameter |\n| Nylon 6.6 polymer |\n| Oil, wheat germ, British Pharmaceutical Codex 1954 Grade |\n| Oxoamiduin (odourless garlic powder extract) meeting ALL of the following:(a) light yellowish-white, almost odourless powder with a slightly sweet taste;(b) loss of drying less than 7% W/W at 105C for 4 hours;(c) soluble in water, almost insoluble in pure Methanol and Ethanol |\n| Parts for disposable cigarette lighters to which subheading 9613.10.00 of Schedule 3 to the Customs Tariff Act 1995, as amended or as proposed to be amended, would apply at the time of entry into home consumption |\n| Pentaerythritol |\n| Pigment Blue 29 |\n| Pigment Red 122 |\n| Pigment Violet 15 |\n| Pigment Violet 19 |\n| Pigment Violet 23 |\n| Pigment Yellow 110 |\n| Polyester polymer |\n| Polymethyl Methacrylate in granula form |\n| Polyurethane spandex yarn |\n| Precipitated Barium Sulphate |\n| Primary Oleyl Amine |\n| Primed centrefire cartridge cases |\n| Pure silk fabric |\n| Pyridoxine Hydrochloride, British Pharmacopoeia 1980 or United States Pharmacopoeia XX Grade, no particle greater than 180 micron diameter |\n| Riboflavine, British Pharmacopoeia 1980 or United States Pharmacopoeia XX Grade, no particle greater than 180 micron diameter |\n| Rolled structural steel (S1021 Steel) rails with tongue and groove rail ends |\n\n \nMaterials\n\n| Royal Jelly, lyophilized, in starch |\n| --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| Rutin, United States National Formulary XI Grade, no particle greater than 180 micron diameter |\n| Silcasil \"S\" - silicone dioxide flow agent |\n| Silicon Carbide grain, grit size 16-1200 |\n| Single 30’s spun polyester knitting yarn, 30/ECC, 100% spun - raw white on cone, weighing more than 150g per 9000m |\n| Single 50’s spun polyester knitting yarn, 100% spun 50/1 ECC - raw white on cone, weighing less than 150g per 9000m |\n| Single 72’s high bulk acrylic knitting yarn, 100% spun, dyed on cone, 72/dyed metric count weighing less than 150g per 9000m |\n| 64, 84 and 110 decitex triacetate yarn |\n| Sodium Meta Bisulphide |\n| Sodium Sulphite |\n| Solid saturated Carboxylated Polyester resin in powder or granular form |\n| Sorbitan Mono-Oleate, British Pharmacopoeia 1980 Grade |\n| Stainless steel rod, hot rolled, in coil form, for use by continuous hot or cold drawing operations, other than in the manufacture of stainless steel bars, rods or wire in cut lengths having a diameter of 9mm or greater |\n| Stainless steel rod, hot rolled, in coil form, having a diameter of 9mm or less |\n| Straight Rough Oak (Quercus species) staves either sawn or riven but NOT otherwise processed machined or bent |\n| Synthetic brown iron oxide Pigment |\n| Synthetic red iron oxide Pigment |\n| Synthetic yellow iron oxide Pigment |\n| Thiamine Hydrochloride, British Pharmacopoeia 1980 Grade, no particle greater than 180 micron diameter |\n| Thiamine Mononitrate, United States Pharmacopoeia XX Grade, no particle greater than 180 micron diameter |\n| Triglycidyl Isocyanurate |\n| Woven fibreglass impregnated with Phenolic resin |\n\nDated this thirteenth day of February 2002.\n\nJohn Peter Arndell\n\n(Delegate of the Chief Executive Officer of Customs)","sortOrder":0}],"analysis":{"flash_summary":{"complexity_score":4,"scope_assessment":{"changed":false,"description":"Based solely on the text of this instrument, it does not state or show any alteration to the broader legal scope of the ANZ CER Trade Agreement. It simply declares a list of materials to be treated as New Zealand manufactured raw materials under paragraph 153J(1)(c); there is no express indication within the notice that the scope has been expanded or narrowed relative to prior determinations."},"complexity_factors":["Legal basis: issued under paragraph 153J(1)(c) of the Customs Act 1901 and signed by a delegate of the Chief Executive Officer (instrument header and signature).","Form: long, itemised schedule containing many varied products across chemical, pharmaceutical, metal, textile and pigment industries (the body of the notice).","Technical specificity: multiple entries include tight numerical or laboratory specifications (e.g. particle sizes, PPM limits, Bloom ratings, moisture loss, alloy/grade designations) requiring lab testing or technical verification.","Cross‑references to external standards and legislation: references to British Pharmacopoeia, United States Pharmacopeia, Food Chemicals Codex, Customs Tariff Act Schedule 3 and specific product codes (multiple item entries).","Verification burden: customs officers and importers must interpret product descriptions against commercial documentation, test reports or physical inspection to establish eligibility.","Precision in dimensions and composition: several entries specify exact dimensions, alloy grades or finishing state (e.g. hacksaw blanks, steel strips, nickel silver cutlery blanks), increasing factual-comparison work at border control.","Diversity of product types increases administrative overhead: a single notice covers pharmaceuticals, pigments, textiles, metals, oils, and mechanical parts, requiring varied technical expertise in customs decisions.","Temporal context: dated 13 February 2002 — raises practical questions about currency of referenced standards or tariff amendments when applied at entry."],"plain_english_summary":"Determines a specific list of goods to be treated as “manufactured raw materials of New Zealand” under the Australia–New Zealand Closer Economic Relations Trade Agreement. This classification affects importers, customs officials and manufacturers by changing which items may qualify for preferential customs or tariff treatment and requires meeting precise product specifications to qualify."},"flash_summary_failed":{"failed":true,"reason":"Unauthenticated. Configure AI_GATEWAY_API_KEY or use a provider module. Learn more: https://ai-sdk.dev/unauthenticated-ai-gateway","source":"analysis-cron"},"kimi_summary":{"content_quality":"ok","complexity_score":4,"scope_assessment":{"changed":false,"description":"This notice performs exactly the function intended by Section 153J of the Customs Act 1901 — to specify which New Zealand manufactured raw materials qualify for preferential treatment under ANZCERTA. The scope remains tightly focused on its original purpose of implementing the trade agreement's rules of origin and tariff concessions for specific listed materials."},"complexity_factors":["Highly technical product specifications with precise measurements (e.g., 'no particle greater than 180 micron diameter', 'NOT more than 15 PPM sulphur dioxide')","108 distinct items listed across multiple categories (chemicals, metals, textiles, pharmaceuticals, food ingredients)","References to external technical standards (British Pharmacopoeia 1980, United States Pharmacopoeia XX, Food Chemicals Codex Third Edition)","Conditional descriptions using multiple qualifiers (e.g., 'NOT more than X', 'NOT less than Y', 'either...but NOT otherwise')","Cross-reference to Customs Tariff Act 1995 subheading for one item (cigarette lighter parts)","Single legislative provision basis (Section 153J of Customs Act 1901) but applied to diverse product categories"],"plain_english_summary":"This Customs Notice declares 108 specific New Zealand-produced items as \"manufactured raw materials\" under the Australia–New Zealand Closer Economic Relations (CER) agreement, allowing them preferential tariff treatment on import into Australia. It affects New Zealand exporters, Australian importers and manufacturers who use these inputs, and matters because it eases origin rules and lowers trade barriers for qualifying products across the Tasman."}},"importantCases":[],"_links":{"self":"/api/acts/f2006b11614","history":"/api/acts/f2006b11614/history","analysis":"/api/acts/f2006b11614/analysis","conflicts":"/api/acts/f2006b11614/conflicts","importantCases":"/api/acts/f2006b11614/important-cases","documents":"/api/acts/f2006b11614/documents"}}