{"id":"F2006B09962","name":"AD/FPE/14 - Model T1-FM 100 Fire Extinguisher","slug":"ad-fpe-14-model-t1-fm-100-fire-extinguisher","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":55228,"registerId":"commonwealth-F2006B09962-current","compilationNumber":null,"startDate":"2026-04-02","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"AIRWORTHINESS DIRECTIVE","sectionType":"part","heading":"AIRWORTHINESS DIRECTIVE","content":"# AIRWORTHINESS DIRECTIVE\n\n![](image.002.png)\n\n![](image.002.png)  \nFor the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.","sortOrder":0},{"sectionNumber":"AD/FPE/14 Model T1-FM 100 Fire Extinguis","sectionType":"part","heading":"AD/FPE/14 Model T1-FM 100 Fire Extinguisher 4/2000","content":"# AD/FPE/14 Model T1-FM 100 Fire Extinguisher 4/2000\n\nApplicability: Model T1-FM 100 portable fire extinguisher for which Type Approval No. S 106-94 (Moravan a.s.) has been issued.\n\nRequirement: Remove the fire extinguisher from service.\n\nNote: Czech AD CAA-AD-003/2000 refers.\n\nCompliance: Not later than the time when the next pressure check is due.\n\nThis Airworthiness Directive becomes effective on 20 April 2000.\n\nBackground: The Czech CAA has withdrawn the Type Approval for the affected fire extinguisher as a result of non-conformance with aeronautical production requirements.\n\n![](image.003.png)  \n\nBernard Malcolm Hole\n\nDelegate of the Civil Aviation Safety Authority 9 March 2000\n\n![](image.002.png)  \n\nThe above AD is notified in the Commonwealth of Australia Gazette on 22 March 2000.","sortOrder":1}],"analysis":{"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This AD maintains its original narrow scope — addressing a specific unsafe fire extinguisher model. There is no evidence of scope creep; it targets exactly one product with a clear safety rationale."},"complexity_factors":["Very short document (under 300 words)","Only 1 defined term implicitly referenced (Type Approval No. S 106-94)","Single, unambiguous requirement: 'Remove the fire extinguisher from service'","No cross-references to other legislation beyond a note about the Czech AD","Simple conditional logic: compliance tied to next scheduled pressure check","No exceptions, exemptions, or nested conditions"],"plain_english_summary":"CASA requires removal of the T1‑FM 100 fire extinguisher from all Australian aircraft and aviation use; anyone with this model installed or in service must replace it by the next routine pressure check. The ban follows a Czech authority finding that the manufacturer failed to meet production standards — a safety‑critical, legally binding AD tied to Czech AD CAA‑AD‑003/2000."},"flash_summary":{"complexity_score":2,"scope_assessment":{"changed":false,"description":"The AD's scope aligns with its stated purpose: to remove from service extinguishers whose Type Approval was withdrawn by the Czech CAA. It does not broaden to other models, nor does it add replacement or corrective specifications beyond removal by the next pressure check."},"complexity_factors":["Narrow, single-model applicability (Model T1-FM 100; Type Approval S 106-94).","Simple, mandatory action: remove the extinguisher from service (Requirement).","Compliance timing tied to routine maintenance schedule: 'next pressure check' (Compliance).","No technical remediation, replacement, disposal or testing procedures specified—creates operational ambiguity for follow-up steps.","Background reliance on foreign regulator action (Czech CAA withdrawal of Type Approval) as stated (Background).","Limited administrative discretion: CASA delegate issued the AD and set an effective date (Delegate signature; Effective date)."],"plain_english_summary":"This Airworthiness Directive orders removal from service of the Model T1‑FM 100 portable fire extinguisher (Type Approval No. S 106‑94). It applies to any aircraft or aeronautical product fitted with that extinguisher and must be complied with by the time of the next scheduled pressure check.\n\nCASA issued the AD after the Czech CAA withdrew the extinguisher's Type Approval for non‑conformance with aeronautical production requirements. The AD mandates removal but does not prescribe replacement or further remedial steps."},"flash_summary_failed":{"failed":true,"reason":"A positive credit balance is required for all requests, including BYOK, so fallback providers remain available. Add credits at https://vercel.com/d?to=%2F%5Bteam%5D%2F%7E%2Fai%3Fmodal%3Dtop-up to continue.","source":"analysis-cron"}},"importantCases":[],"_links":{"self":"/api/acts/ad-fpe-14-model-t1-fm-100-fire-extinguisher","history":"/api/acts/ad-fpe-14-model-t1-fm-100-fire-extinguisher/history","analysis":"/api/acts/ad-fpe-14-model-t1-fm-100-fire-extinguisher/analysis","conflicts":"/api/acts/ad-fpe-14-model-t1-fm-100-fire-extinguisher/conflicts","importantCases":"/api/acts/ad-fpe-14-model-t1-fm-100-fire-extinguisher/important-cases","documents":"/api/acts/ad-fpe-14-model-t1-fm-100-fire-extinguisher/documents"}}