{"id":"F2007L00381","name":"AD/B767/228 - Forward and Aft Cargo Compartments Water and Drain Line Heaters","slug":"ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":63411,"registerId":"commonwealth-F2007L00381-current","compilationNumber":null,"startDate":"2026-04-02","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"Boeing 767 Series Aeroplanes","sectionType":"division","heading":"Boeing 767 Series Aeroplanes","content":"### Boeing 767 Series Aeroplanes\n\n| AD/B767/228 | Forward and Aft Cargo CompartmentsWater and Drain Line Heaters | 3/2007 |\n| ----------- | -------------------------------------------------------------- | ------ |\n\n| Applicability: | Model 767-200 and -300 series aeroplanes, as identified in Boeing Service Bulletin (SB) 767-30A0038, Revision 2, dated 23 February 2006. |\n| -------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| | Note 1: For the purposes of this Directive an open cargo floor configuration, as identified in Boeing SB 767-30A0038, is a floor without panels installed between all roller trays in the cargo compartment. A closed cargo floor configuration, as identified in SB 767-30A0038, is a floor with panels installed between all roller trays in the cargo compartment. |\n| Requirement: | 1. Carry out general visual inspections of the forward and aft cargo compartments in accordance with the Accomplishment Instructions of SB 767-30A0038, Revision 2, as follows: |\n| | a. Foreign object debris (FOD) or contamination on, near, or around the potable water supply and grey water drain lines. |\n| | b. Indications of heat damage, exposed foam insulation, or missing or damaged protective tape of all heater tape on the potable water supply and grey water drain lines. |\n| | 2. If any discrepancy identified in Requirement 1.a. or 1.b. is found during any Requirement 1 general visual inspection, carry out applicable corrective action in accordance with the Accomplishment Instructions of SB 767-30A0038,Revision 2. |\n| | 3. Carry out either of the following in accordance with the Accomplishment Instructions of SB 767-30A0038, Revision 2: |\n| | a. Replace the heater tapes on the potable water supply and grey water drain lines of the forward and aft cargo compartments, as applicable, with Adel Wiggins ribbon heaters, or |\n| | b. Deactivate and remove any defective heater tape(s) from the potable water supply and grey water drain line(s) of the forward and aft cargo compartments and wrap the drain line(s) with foam insulation. |\n\n| | Accomplishing either Requirement 3.a. or 3.b. terminates the Requirement 1 repetitive inspections. |\n| ----------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| | Aeroplanes having variable number (VN) VN471 and VN472 - Actions accomplished in the forward cargo compartment before the effective date of this Directive in accordance with Boeing Alert Service Bulletin (ASB) 767-30A0038, dated16 December 2004; or SB 767-30A0038, Revision 1, dated 29 September 2005; are acceptable for compliance with the corresponding requirements of this Directive for the forward cargo compartment only. |\n| | Aeroplanes having VN VS704 through VS707 inclusive - Actions accomplished in the forward cargo compartment before the effective date of this Directive in accordance with SB 767-30A0038, Revision 1, are acceptable for compliance with the corresponding requirements of this Directive for the forward cargo compartment only. |\n| | For aeroplanes other than those having VN VN471, VN472 and VS704 through VS707 inclusive - Actions accomplished in the forward and aft cargo compartments, as applicable, before the effective date of this Directive in accordance with ASB767-30A0038 or SB 767-30A0038, Revision 1, are acceptable for compliance with the corresponding requirements of this Directive. |\n| | Later revisions of the SB 767-30A0038, Revision 2, approved by the United States Federal Aviation Administration (FAA) as an Alternate Method of Compliance (AMOC) to FAA AD 2007-02-18 are considered acceptable for compliance with the equivalent Requirements of this Directive. |\n| | Note 2: FAA AD 2007-02-18 Amdt 39-14905 refers. |\n| Compliance: | For Requirement 1.a. - Within 18 months since the date of issuing the original certificate of airworthiness or the date of issuing the original export certificate of airworthiness; or within 90 days after the effective date of this Directive, whichever is later, and thereafter at intervals not to exceed 600 hours time in service, until Requirement 3 is accomplished. |\n| | For Requirement 1.b. - Within 18 months since the date of issuing the original certificate of airworthiness or the date of issuing the original export certificate of airworthiness; or within 90 days after the effective date of this Directive, whichever is later, and thereafter at intervals not to exceed 1 800 hours time in service, until Requirement 3 is accomplished. |\n| | For Requirement 2 - Before further flight after the Requirement 1.a. or 1.b. inspections. |\n\n| | For Requirement 3 - |\n| ----------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n| | a. For aeroplanes on which, as of the effective date of this Directive, the heater tape has not been replaced in accordance with ASB 767-30A0037, dated28 May 2002 or SB 767-30A0037, Revision 1, dated 19 July 2002 - Within 42 months since the date of issuing the original certificate of airworthiness or the date of issuing the original export certificate of airworthiness, or within 24 months after the effective date of this Directive, whichever occurs later. |\n| | b. For aeroplanes on which, as of the effective date of this Directive, the heater tape has been replaced in accordance with ASB 767-30A0037, or SB767-30A0037, Revision 1 - Within 42 months after replacing the heater tape, or within 24 months after the effective date of this Directive, whichever occurs later. |\n| | This Airworthiness Directive becomes effective on 15 March 2007. |\n| Background: | This Directive requires repetitive inspections of the forward and aft cargo compartments, as applicable, for discrepancies of the potable water supply and grey water drain lines; and applicable corrective actions if necessary. The Directive also requires replacing the heater tapes on the potable water supply and grey water drain lines of the forward and aft cargo compartments, as applicable, with new ribbon heaters, or deactivating and removing any defective heater tape and wrapping the drain line with foam insulation; either action ends the repetitive inspections. |\n| | The Directive results from a report of a fire in the aft cargo compartment and is issued to prevent overheating of the heater tape on potable water fill and drain lines, which may ignite accumulated debris or contaminants on or near the potable water fill and drain lines, resulting in a fire in the aeroplane. |\n\n![](image.001.png) \nJames Coyne \nDelegate of the Civil Aviation Safety Authority\n\n1 February 2007","sortOrder":0},{"sectionNumber":"AD/B767/228","sectionType":"part","heading":"AD/B767/228","content":"## AD/B767/228","sortOrder":1},{"sectionNumber":"Forward and Aft Cargo CompartmentsWater ","sectionType":"part","heading":"Forward and Aft Cargo CompartmentsWater and Drain Line Heaters","content":"## Forward and Aft Cargo Compartments \nWater and Drain Line Heaters","sortOrder":2},{"sectionNumber":"3/2007","sectionType":"part","heading":"3/2007","content":"## 3/2007","sortOrder":3}],"analysis":{"flash_summary_failed":{"failed":true,"reason":"Unauthenticated. Configure AI_GATEWAY_API_KEY or use a provider module. Learn more: https://ai-sdk.dev/unauthenticated-ai-gateway","source":"analysis-cron"},"kimi_summary":{"content_quality":"ok","complexity_score":6,"scope_assessment":{"changed":false,"description":"This is a standard Airworthiness Directive with a focused, singular safety purpose: addressing fire risk from cargo compartment heater tapes. The scope remains tightly constrained to Boeing 767-200/300 series aircraft and the specific technical issue of water/drain line heater tapes. The various compliance pathways and variable number exceptions represent necessary tailoring for different aircraft configurations and prior maintenance history, not scope creep."},"complexity_factors":["Multiple variable number (VN) categories with different compliance pathways (VN471, VN472, VS704-VS707, and all others)","Nested conditional logic for compliance deadlines based on aircraft history (whether heater tape was previously replaced under earlier service bulletins)","Cross-references to multiple external documents: Boeing Service Bulletin 767-30A0038 (Revision 2), earlier revisions of same SB, Boeing Alert Service Bulletin 767-30A0038, and Boeing SB 767-30A0037","Dual compliance timelines that depend on 'whichever is later' calculations (certificate of airworthiness date vs directive effective date vs previous modification date)","Different inspection intervals for Requirement 1.a (600 hours) vs Requirement 1.b (1,800 hours)","Partial compliance provisions allowing actions taken under earlier directives to count for forward cargo compartment only for specific aircraft serial numbers","Acceptance of FAA Alternate Method of Compliance (AMOC) as equivalent compliance","Technical terminology requiring definitions (open vs closed cargo floor configuration in Note 1)"],"plain_english_summary":"This CASA Airworthiness Directive applies to Boeing 767-200/-300 aircraft and mandates action to eliminate a fire risk from heater tapes on potable water and grey-water lines in forward and aft cargo compartments. Operators must inspect for debris, contamination, or heater-tape damage, correct any defects before flight, and perform a terminating modification—either install Adel Wiggins ribbon heaters or remove/deactivate tapes and add foam insulation. It targets aircraft listed in Boeing SB 767-30A0038 Rev 2."},"flash_summary":{"complexity_score":5,"scope_assessment":{"changed":false,"description":"The Directive applies to Boeing 767‑200 and ‑300 series aeroplanes as identified in Boeing SB 767‑30A0038, Revision 2 (Applicability). It accepts prior actions performed under specified ASB/SB revisions for certain VN ranges and allows later SB revisions only if FAA‑approved as an AMOC (Applicability notes; Later revisions). The text does not expand or narrow the stated applicability beyond those SB identifiers and the listed VN exceptions, so scope has not changed from the instrument's stated targeting."},"complexity_factors":["Technical maintenance specificity: inspections target heater tape condition, insulation, protective tape and nearby debris (Requirement 1.a & 1.b).","Multiple, different inspection intervals and thresholds: 600 hours for FOD checks (Req 1.a) vs 1,800 hours for tape condition (Req 1.b), and initial compliance deadlines tied to certificate dates or effective date (Compliance).","Two alternative terminating actions with different procedures and outcomes: replace with Adel Wiggins ribbon heaters (Req 3.a) OR remove/deactivate defective tape and add foam insulation (Req 3.b).","Corrective-action urgency: discrepancies found require corrective action before further flight (Requirement 2).","Applicability is tethered to a specific Boeing Service Bulletin and identified VN numbers, with carve-outs for prior work done under earlier SB/ASB revisions (Applicability & notes).","Acceptance of later SB revisions only if approved as an FAA AMOC introduces cross‑jurisdictional approval dependency (Later revisions/FAA AMOC).","Record and scheduling complexity: deadlines depend on either original certificate dates, dates of prior heater replacements, or the AD effective date (Compliance for Req 3).","Operational impact concentrated on operators of the listed 767 variants who bear inspection, repair/upgrade costs and scheduling burden (Applicability & Requirements)."],"plain_english_summary":"This directive requires visual inspections of potable water and grey-water drain line heater tapes in the forward and aft cargo compartments of specified Boeing 767‑200/‑300 aircraft, and mandates either replacing the heater tape with Adel Wiggins ribbon heaters or removing/deactivating defective tape and insulating the lines; completing either option ends the repetitive inspections. It affects aircraft operators and maintenance organisations of the listed 767s because the measure addresses heater‑tape overheating that could ignite debris and cause a cargo‑compartment fire."}},"importantCases":[],"_links":{"self":"/api/acts/ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters","history":"/api/acts/ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters/history","analysis":"/api/acts/ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters/analysis","conflicts":"/api/acts/ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters/conflicts","importantCases":"/api/acts/ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters/important-cases","documents":"/api/acts/ad-b767-228-forward-and-aft-cargo-compartments-water-and-drain-line-heaters/documents"}}