{"id":"F2006B02334","name":"AD/AMD 10/19 - Outboard Slats Wing Anti-Icing Hoses - Inspection, Replacement, Modification","slug":"ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":41564,"registerId":"commonwealth-F2006B02334-current","compilationNumber":null,"startDate":"2026-04-01","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"AD/AMD 10/19 - Outboard Slats Wing Anti-Icing Hoses - Inspection, Replacement, Modification","content":"---\nmeta-content-style-type: text/css\nmeta-content-type: application/xhtml+xml; charset=utf-8\nmeta-generator: Aspose.Words for .NET 22.10.0\n---\n\n?xml version=\"1.0\" encoding=\"utf-8\" standalone=\"no\"?>\n\nCOMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY\n\nSCHEDULE OF AIRWORTHINESS DIRECTIVES\n\n \n\n![](image.001.png)  AMD Falcon 10 Series Aeroplanes\n\n \n\n# AD/AMD 10/19 Outboard Slats Wing Anti-Icing Hoses -\n\nInspection, Replacement, Modification\n\nApplicability: All models with S/Nos. 1 to 260. Requirement: AMD SB No. F10-A246. (ATA F10-A30-21).\n\nCompliance: 1. Preliminary Inspection Before 31 October 1984.\n\n# 10/84\n\n \n\n2. Replacement Should no defects be found; as determined by the results of the preliminary inspection as described in the Requirement Document, replace hoses before 30 June 1985.\n\n \n\nBackground: Further to the Requirements of AD/AMD-10/4 AMDT 1, the manufacturer has produced a supplement to AMD SB No. F10/239 requiring further attention to the outboard slats wing anti-icing hoses to eliminate unacceptable tolerances subjecting hoses to compression loads.\n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n\n \n","sortOrder":0}],"analysis":{"kimi_summary":{"content_quality":"ok","complexity_score":2,"scope_assessment":{"changed":false,"description":"This AD remains tightly scoped to its original purpose: addressing a specific mechanical defect in wing anti-icing hoses on a limited fleet of Falcon 10 aircraft. The reference to 'further to the Requirements of AD/AMD-10/4 AMDT 1' indicates this is a follow-up action reinforcing an earlier directive, not scope creep."},"complexity_factors":["Very short document (approximately 200 words)","Only 2 defined compliance deadlines","Single applicability criterion (serial numbers 1–260)","No nested conditional logic — simple 'if no defects found, then replace' structure","No cross-references to other legislation beyond citing the parent Civil Aviation Regulations 1998 and one previous AD (AD/AMD-10/4 AMDT 1)","Minimal technical terminology, mostly referencing external manufacturer documents"],"plain_english_summary":"This AD requires owners/operators of Dassault Falcon 10 aircraft (serial numbers 1–260) to inspect the outboard slat wing anti-icing hoses for damage and replace them as mandated.  \n\nIt responds to hose compression from excessive manufacturing tolerance that could cause anti-icing failure in icing conditions; inspections must be completed by 31 October 1984 and replacements (even if no defect found) by 30 June 1985."},"flash_summary":{"complexity_score":4,"scope_assessment":{"changed":true,"description":"This AD supplements prior AD/AMD‑10/4 AMDT 1 by imposing a manufacturer’s supplement to AMD SB No. F10/239 (now AMD SB No. F10‑A246) that adds a targeted inspection requirement and a mandatory replacement deadline for outboard slats anti‑icing hoses on Falcon 10 aeroplanes S/N 1–260, explicitly to remove unacceptable tolerances that can subject hoses to compression loads."},"complexity_factors":["Cross-references to external documents: mandatory compliance relies on AMD SB No. F10‑A246 (Requirement document) rather than containing full technical steps in the AD.","References and linkage to prior directive: supplements AD/AMD‑10/4 AMDT 1 and AMD SB No. F10/239, creating layered obligations to track.","Tight, fixed deadlines for inspection (31 Oct 1984) and replacement (30 Jun 1985) increase logistical pressure on operators and MROs.","Applicability limited by serial number range (S/N 1–260) requires record checks and selective action by owners/operators.","Technical maintenance task: inspection/replacement requires certified maintenance personnel and parts, producing direct costs for aircraft owners/operators.","Wording ambiguity: the phrase 'Should no defects be found; ... replace hoses' is potentially unclear about conditionality and triggers for replacement.","Enforcement and cost allocation fall on operators/owners and their maintenance organisations; regulator enforces compliance under Part 39."],"plain_english_summary":"This Airworthiness Directive requires operators of AMD Falcon 10 series aeroplanes (serial numbers 1–260) to inspect specified outboard slats wing anti‑icing hoses by 31 October 1984 and to replace them in accordance with AMD SB No. F10‑A246 by 30 June 1985. The measure is intended, per the instrument, to remove unacceptable tolerances that can subject those hoses to compression loads and so addresses a specific structural/maintenance risk."}},"importantCases":[],"_links":{"self":"/api/acts/ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification","history":"/api/acts/ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification/history","analysis":"/api/acts/ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification/analysis","conflicts":"/api/acts/ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification/conflicts","importantCases":"/api/acts/ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification/important-cases","documents":"/api/acts/ad-amd-10-19-outboard-slats-wing-anti-icing-hoses-inspection-replacement-modification/documents"}}